Checking, Cancelling Or Changing Programme Settings; Program Overlap Warning Display; Timer Warning Display - JVC HR-V210E Specifications

Checking, cancelling or changing programme
settings
A
Disengage timer recording standby mode
Press #, then press 1.
When "AUTO TIMER" is set to "ON" (
B
Access Program Check screen
Press ".
C
Access Program screen
Press " again. Each time you press ",
the next programme's screen appears.
D
Cancel or change programme setting
To cancel a programme, press &.
To change a programme, press the
appropriate button: START
keys "1" and/or "4"), STOP
keys "2" and/or "5"), DATE
DAILY (number key "8"), WEEKLY (number key "9") and/or PR
/ .
E
Return to normal screen
Press " repeatedly until no Program screen is shown.
F
Re-engage timer recording standby mode
Press #. The recorder turns off automatically and "#" is displayed
on the display panel.
When "AUTO TIMER" is set to "ON" (
recording standby mode automatically resumes when you turn
off the recorder.
12), press only 1.
/ (number
/ (number
/ (number keys "3" and/or "6"),
12), the timer

Program overlap warning display

If "PROGRAM OVERLAPPED" appears, you have another
program overlapping the program you have just made. The
Program Check screen appears and conflicting programs will start
blinking.
PROGRAM OVERLAPPED
Example:
Program 1 (you have just made) and Program 4 overlap each other
A
Select program to modify
Press , then press OK or e.
rt
You can only select one of the
overlapping programs.
If you do not mind this overlap, press
PROG to finish the timer program
setting. The program starting earlier or
program with the lower program
number will be recorded.
B
Cancel or change program setting
To cancel a program, press & when the
Program screen you do not want is
shown.
To change a program, press the
appropriate button: START
(number keys "1" and/or "4"),
STOP / (number keys "2" and/or
"5"), DATE / (number keys "3" and/or "6"), and/or PR
when the Program screen on which you want to make changes is
shown, then press OK or e.
If the overlap is not yet solved, the conflicting programs will be
shown on the Program check screen. Repeat the above steps
again.

Timer warning display

A warning appears on the TV screen to
tell you that the timer-recording is to start
in 5 minutes if you're not in the Timer
mode at that time. The warning blinks for
the entire 5 minutes leading up to the
start of timer recording. To clear the
display, press & on the remote control.
— 10 —
[PROG] : EXIT
/
[PROG] : EXIT
/