Graco 217-38 EM 380 User Manual page 3

KEEP CLEAR OF MOVING PARTS USE EXTREME CARE WHEN SERVICING
The electric motor has an overheating protection device Before removing any part for cleaning or servicing,
which automatically restarts the motor when
it
cools. always disconnect power source and carefully relieve
stopped, shut off the unit, relieve pressure and pull out safety and any other equipment safety locks, and open-
So, before examining or working on a motor which has fluid pressure by triggering spray gun, engaging trigger
the electrical plug. This will avoid the hazard of the ing
any drain or bleeder valves. Leave drain valve open
motor starting unexpectedly. during servicing. Remove tip from gun for cleaning.
not put your fingers into any openings in shield.
KEEP CLEAR of moving parts when unit is running; do
ALWAYS CHECK to be sure switch is OFF and all lines
are clear
of
moving parts before plugging in the power
cord.
ALWAYS unplug unit before removing gearbox cover
for any reason.
Basic' E M 380 Components
E
G
B
A. Pump
B. Suction tube for paint with strainer
G. Power supply cord
C.
Filter with drain valve
H. Carrying handle
1.
Spray Gun
D. ON/OFF switch J. Reverse-A-Clean
111
E.
Paint pressure control
F. Electric motor
307463
3