Akai LCT2765TD Operating Instructions Manual page 19

Connect audio amplifier
Switch off LCD TV and external equipment before
connecting cables.
1. Connect the LCD TV-combo's COAXIAL OUT
to the Audio Amplifier COAXIAL Input terminal by
a coaxial cable.
2. Press Power to turn on the LCD TV-combo.
Turn on external equipment also.
3. Press Source to select DVD signal source, and
set the Audio Amplifier to coaxial input mode.
4. When DVD is playing, you can enjoy coaxial
digital audio by Audio Amplifier.
Insert the Disc to slot-in DVD Player
1. Press Source button to select DVD signal source.
2. Insert a disc into the slot-in DVD Player's disc
tray, please confirm the disc's screen is face to us.
3. The DVD Play will auto slot in the disc, and the
LCD TV will display "Loading", if the disc type is
fit the spec, you can enjoy the playing.
Note: Please be noted that the disc's contents must be
in front, if you put it in reverse, the LCD TV screen
will display "No Disc".
Connecting directly to cable or an antenna
When using 75Ω coaxial Aerial: Connect directly to the RF terminal of the tuner.
VHF Antenna
1m above
Special Antenna
18
UHF Antenna
Mixer
75Ω Coaxial Aerial
Disc's
screen
side
RF(VHF/UHF) terminal