Filling Oil Injection System; Filling Remote Oil Tank (If Equipped) - Mercury Sea Pro User Manual

NOTE: At the end of the break-in period, visually check to see if the oil level in the oil injection system has dropped.
Oil usage indicates the oil injection system is functioning correctly.
Gas/Oil Ratio
50:1 (2%)
MODELS WITHOUT OIL INJECTION
Use a 25:1 (4%) gasoline/oil mixture in the first tank of fuel.
After the break-in fuel mixture is used up, use a 50:1 (2%) gasoline/oil mixture. Follow the table for mixing ratios.
Gas/Oil Ratio
25:1 (4%)
50:1 (2%)

Filling Oil Injection System

1. Check oil level using the sight gauge in front of the outboard.
2. Remove the fill cap and fill tank with oil.
Capacity
Oil tank 3.2 liters (96 fl. oz.) Mercury or Quicksilver Premium 2-cycle TC-W3 outboard oil
3. Reinstall fill cap and tighten securely.

Filling Remote Oil Tank (If Equipped)

1. Remove fill cap and fill with the specified oil.
Capacity
Oil tank 11.5 liters (3 gal.)
2. Reinstall filler cap and tighten securely.
3. Check oil level in the engine oil injection tank. The oil level should be 1/2 full to completely full. Refill if
necessary.
FUEL & OIL
GASOLINE/OIL MIXING RATIO CHART
3.8 liters (1 gal.) gas
89 ml (3 fl. oz.) oil
GASOLINE/OIL MIXING RATIO CHART
3.8 liters (1 gal.) gas
148 ml (5 fl. oz.) oil
89 ml (3 fl. oz.) oil
Mercury or Quicksilver Premium 2-cycle TC-W3 outboard oil
11.5 liters (3 gal.) gas
237 ml (8 fl. oz.) oil
11.5 liters (3 gal.) gas
473 ml (16 fl. oz.) oil
237 ml (8 fl. oz.) oil
Fluid Type
Fluid Type
24
23 liters (6 gal.) gas
473 ml (16 fl. oz.) oil
23 liters (6 gal.) gas
946 ml (32 fl. oz.) oil
473 ml (16 fl. oz.) oil
ob01436