Dial Tone Battery Alarm - Dial Tone 2 - Fält Communications AB 252236 User Manual

Bares:On
Battery V level OK from Lift 452
SMS to GSM Gateway
The GSM Gateway will acknowledge a correct programming by returning a SMS as above.
In this example when the power to the Gateway is reestablished and the battery voltage is above the
set voltage level the following SMS from the GSM Gateway:
Battery V level OK from Lift 452
SMS from GSM Gateway
Both functions described above are switched off by sending the following SMS to the GSM Gateway
Balarm:off
SMS to GSM Gateway
The SMS is acknowledged with a SMS from the GSM Gateway.
The Battery replaced SMS (Bares) function described above can be switched off separately by
sending the following SMS to the GSM Gateway
Bares:off
SMS to GSM Gateway
The SMS is acknowledged with an SMS from the GSM Gateway.

5.2 Dial tone battery alarm - Dial tone 2

The Dial tone battery alarm indicating a battery fault alarm, to the lift phone is default activated but can
be turned off. In case the function is deactivated the GSM Gateway will always use normal dial tone
when the line is taken off-hook.
To deactivate the Dial tone battery alarm (dial tone 2); send the left side SMS to the GSM Gateway.
The Gateway will return the answer on the right side.
162236M User Manual GSM Gateway
Bares:On
Battery V level OK from Lift 452
SMS from GSM Gateway
Balarm:OFF
Bares:OFF
SMS from GSM Gateway
:
Balarm:ON
Bares:OFF
SMS from GSM Gateway
:
9