Table of Contents
Advertisement
Dial tone2:off
SMS to GSM Gateway
To reactivate the dial tone 2 (battery alarm/low battery voltage indication, dial tone); send the left side
SMS to the GSM Gateway. The Gateway will return the answer on the right side.
Dial tone2:on
SMS to GSM Gateway
5.3 Status
Get current status of the GW by sending a "Status" SMS. The SMS must contain the SMS Access code followed
by a new line and the word Status. The default Access code is 1111 and can be changed using the FältCom
Manager SW. If the access code or the request command (Status) is incorrect the GSM Gateway will not answer
the SMS.
1111
Status
SMS to GSM Gateway
Description table of the status SMS:
Parameter
SN
FW
S
S H/L
UT
LC
PWR
162236M User Manual GSM Gateway
Description
Serial number of the Gateway
Firmware version of the Gateway
Current signal strength (signal strength in dBm)
Highest signal during last 24h/lowest signal during last 24h since last restart
Uptime counter, presented in days, hours and minutes.
Last called number, not saved in case of restart.
Current power source – Mains or Battery
Dial Tone2: OFF
SMS from GSM Gateway
Dial Tone2: ON
SMS from GSM Gateway
SN:V12345
FW:3.19
S:31 (-51)
S H/L:2/31 (-109/-51)
UT:450d21d22m
LC:0701234567
PWR:Battery
LRR:Reset
Op:Vodafone
CID:25781258
LAC:65534
Line:On
LHoff:02d01h36m
Example SMS from GSM Gateway
10
Advertisement
Table of Contents
