Troubleshooting
5-2-14. When the BACnet is Not Connecting
Are the static LEDs for Ethernet proper?
5-15
BACnet Gateway_E_32400A(1)_1.indd 15
Start
Is the cable for Ethernet
proper?
Yes
Is the connector for Ethernet
proper?
Yes
(Ethernet Linked, Ethernet Active)
Yes
Are the addresses for
Ethernet correct?
Yes
Is the device instance
number for BACnet correct?
Yes
Change Main Board
Yes
End
No
Check the condition of Ethernet cable
No
Check the condition of Ethernet
connector
No
Change Main Board
No
Check IP, Subnet mask and gateway address
(Refer to install and service manual)
No
Check Device Instance number
Linked : Constant
Active : Flickering
Samsung Electronics
2010-05-17
10:35:02