TYAN Thunder K8SR User Manual page 27

Feature Option
Yes
Yes allows the system to utilize ACPI
ACPI Aware
(Advanced Configuration and Power
O/S
No
Interface) specification
Restore on Stay off Configures how the system board responds
AC/Power to a power failure
Power On
Disabled prevents the chipset power
Disabled
Power
management and APM (Advanced Power
Management Management) features.
Enabled
/APM
Enabled allows the chipset power
management and APM features
Power Button On/Off
Specifies how the externally mounted power
Mode
Standby
button on the front of the chassis is used
Suspend
S1: In this state, the CPU is not executing
instructions, RAM context is maintained,
S1
devices that reference power resources that
Suspend
are on, are actually on, and devices that can
Power Saving
wake the system can cause the CPU to
Type
continue to execute from where it left off
C3: Allows the CPU to be put in a low power
C3
state. In this state, incoming interrupts wake
the CPU
Suspend Time Disabled
Specifies the length of time the system waits
Out
before it enters suspend mode
0 ~ 60
Specifies the amount of time the hard disk
Hard Disk Time Disabled drive can be inactive before the computer
Out (Minute) 0~15 enters a power-conserving state specified in
the Hard Disk Drive Power Down Mode
Specifies the power state that the Green PC-
Suspend
compliant video monitor enters when the
Green PC
Standby
BIOS places it in a power saving state after
Monitor Power
the specified period of display inactivity has
Off
expired
Specifies the Power State that the video
Suspend
Video Power
subsystem enters when the BIOS places it in
Standby
down Mode a power saving state after the specified
period of display inactivity has expired
Off
Suspend
Specifies the power conserving state that the
HDD Power
hard disk drive enters after the specified
Standby
down Mode
period of hard drive inactivity has expired
Off
WWW.TYAN.COM
Description
53
Advanced ACPI Configuration Sub-Menu
Use this screen to select options for the ACPI Advanced Configuration Settings.
Use the up and down arrow (á/â) keys to select an item. Use the Plus and
Minus (+/-) keys to change the value of the selected option. A description of the
selected item appears on the right side of the screen. The settings are described
on this page. The screen is shown below.
BIOS Setup Utility
Main Advanced PCI/PnP Boot
Exit
Advanced ACPI Configuration
ACPI 2.0 Support
ACPI APIC Support
BIOS à AML ACPI table
Feature Option
Yes
ACPI 2.0 Support
No
Enabled
ACPI APIC Support
Disabled
Enabled
BIOS à AML ACPI
table
Disabled
WWW.TYAN.COM
Security Chipset Power
Use [ENTER], [TAB] or
[SHIFT_TAB] to select
[Yes] a field
[Enabled]
Use [+] or [-] to
[Enabled]
configure system time.
+/- Change Field
Tab Select Field
F1 Help
F10 Save and Exit
ESC Exit
Description
Set this value to allow or prevent the
system to be complaint with the
ACPI 2.0 specification.
Set this value to allow the ACPI
BIOS to add a pointer to an OEMB
table in the Root System Description
Table (RSDT) table.
Note: OEMB table is used to pass
POST data to the AML code during
ACPI O/S operations
54