TYAN Thunder K8SR User Manual page 20

Remote Access Configuration Sub-Menu
You can use this screen to view the Remote Access Configuration Menu. This
feature allows access to the Server remotely via serial port. Use the up and down
arrow (á/â) keys to select an item. Use the Plus and Minus (+/-) keys to change
the value of the selected option. The settings are described on the following
pages.
BIOS Setup Utility
Main Advanced PCI/PnP Boot
Exit
Remote Access Configuration
Remote Access
Terminal Type
Serial Port Number
Serial Port Mode
Flow Control
Post-Boot Support
Feature Option
Remote Access Disabled
Serial
ANSI
Terminal Type
VT100
Serial Port Number COM1
COM2
115200 8n1
Serial Port Mode
57600 8n1
19200 8n1
9600 8n1
Hardware
Flow Control
None
Post-Boot Support Disabled
Enabled
39
WWW.TYAN.COM
Security Chipset Power
Use [ENTER],
[TAB] or
[SHIFT_TAB] to
[Serial]
select a field
[ANSI]
Use [+] or [-] to
[COM1]
configure system
[115200 8,n,1]
time.
[Hardware]
+/- Change
[Disabled]
Field
Tab Select Field
F1 Help
F10 Save and
Exit
ESC Exit
Description
Enables remote access to system
through serial port
Sets the type of terminal used for remote
access
Determines which serial port will be used
for remote access
Sets the speed of data to terminal
Enables hardware flow control to protect
buffer overflow
Keeps redirection active after booting to
DOS
USB Configuration Sub-Menu
You can use this screen to view the USB Configuration Menu. Use the up and
down arrow (á/â) keys to select an item. Use the Plus and Minus (+/-) keys to
change the value of the selected option. The settings are described on the
following pages.
BIOS Setup Utility
Main Advanced PCI/PnP
USB Configuration
USB Function
Legacy USB Support
USB ZIP Emulation Type
USB Beep Message
Feature Option
Enabled
USB Function
Disabled
Auto
Disabled
Legacy USB Support
Enabled
Auto
USB ZIP Emulation
Floppy
Type
Hard Disk
Disabled
USB Beep Message
Enabled
40
WWW.TYAN.COM
Boot Security Chipset Power
Exit
Use [ENTER], [TAB] or
[SHIFT_TAB] to select a
field
[Enabled]
[Auto]
Use [+] or [-] to configure
system time.
[Auto]
[Disabled]
+/- Change Field
Tab Select Field
F1 Help
F10 Save and Exit
ESC Exit
Description
Enables or Disables the USB 1.1
controller in the AMD8111
Enables support for legacy USB
devices such as keyboards, mice,
& bootable USB devices
Sets the type of device USB ZIP
drive will emulate
Enables beep during USB Device
Enumeration