Bios Exit Menu - TYAN Thunder K8SR User Manual

Global Timer Reload Sub-Menu
BIOS Setup Utility
Main Advanced PCI/PnP Boot
Exit
Global Timer Reload
Monitor IRQ 3 [Monitor]
Monitor IRQ 4 [Ignore]
Monitor IRQ 5 [Ignore]
Monitor IRQ 6 [Ignore]
Monitor IRQ 7 [Monitor]
Monitor IRQ 8 [Ignore]
Monitor IRQ 9 [Ignore]
Monitor IRQ 10 [Ignore]
Monitor IRQ 11 [Ignore]
Monitor IRQ 12 [Ignore]
Monitor IRQ 13 [Ignore]
Monitor IRQ 14 [Monitor]
Monitor IRQ 15 [Ignore]
Feature Option
Ignore
Monitor IRQ 3 ~15
Monitor
WWW.TYAN.COM
Security Chipset Power
Use [ENTER], [TAB]
or [SHIFT_TAB] to
select a field
Use [+] or [-] to
configure system time.
+/- Change Field
Tab Select Field
F1 Help
F10 Save and Exit
ESC Exit
Description
When set to Monitor, this option
allows BIOS to monitor devices
assigned to these specific IRQ for a
PME# Event. Defaults IRQ 3,7,15 are
set to monitor all others are
ignored.
55
3.08 – BIOS Exit Menu
You can display an Exit BIOS Setup option by highlighting it Arrow (á/â) keys
and pressing Enter.
BIOS Setup Utility
Main Advanced PCI/PnP Boot
Exit
Exit Setting
Save Changes and Exit
Discard Changes and Exit
Discard Charges
Load Optimal Defaults
Load Failsafe Defaults
Save Changes and Exit
Use this option to exit setup utility and re-boot.
All new selections you have made are stored into CMOS.
System will use the new settings to boot up.
Discard Changes and Exit
Use this option to exit setup utility and re-boot.
All new selections you have made are not stored into CMOS.
System will use the old settings to boot up.
Discard Changes
Use this option to restore all new setup values that you have made but not saved
into CMOS.
Load Optimal Defaults
Use this option to load default performance setup values.
Use this option when system CMOS values have been corrupted or modified
incorrectly.
Load Failsafe Defaults
Use this option to load all default failsafe setup values.
Use this option when troubleshooting
WWW.TYAN.COM
Security Chipset Power
Use [ENTER], [TAB] or
[SHIFT_TAB] to select a field
Use [+] or [-] to configure system
time.
+/- Change Field
Tab Select Field
F1 Help
F10 Save and Exit
ESC Exit
56