Removing The Vehicular Charger - Lipman Nurit 8000 Secure User Manual

A POS_STD POS_PLUS – QSP – V
PPLICATION AND

Removing the Vehicular Charger

I
NSTRUCTION
Step
1.
2.
3.
Installing the Paper Roll
I
NSTRUCTION
Step
1. Place the terminal preferably on a flat surface.
Open paper roll cover by pushing the release button in the
2.
direction of the arrow appearing on it.
3. Open the cover.
Remove the paper roll spindle from the paper roll
4.
compartment and insert it into the new paper roll.
While holding the roll in hand, mount it together with its
spindle in place into the 2 slots on both sides of the
5.
compartment. Ensure that the paper roll feeds from the
bottom!
Approximately 1 inch (2.5 cm) of paper should extend out of
6. the paper roll compartment (between the cover and
serrated tear strip.)
Press down on the front of the paper cover until it snaps in
7.
place.
8. Stop.
Installation Guide
. 4_82
ER
Use the following step/action table for assistance with removal.
Unplug the adapter from the cigarette lighter socket.
Grasp the plug end of the charger's cord and pull it out of the NURIT's
"power" port.
Stop.
Before you can process any transaction that requires a receipt, you must
install a paper roll into the printer compartment. To install this roll, use the
following step/action table.
Action
Action
NURIT 8000 S
ECURE
20