Lipman Nurit 8000 Secure User Manual page 190

A POS-STD POS-PLUS - QSP
PPLICATION AND
Working Mode – Tip Options,
S
TEP
Use the [ ] and [ ] to scroll through tips
5.
Press the number corresponding with your
Note: The current status is displayed in parenthesis.
Use the [ ] and [ ] to scroll between Off
6.
Note: Though Tip #1 is already on, select on to
7.
Press [ENTER] without the modification to
Use the [ ] and [ ] to scroll between Off
8.
Note: To have the tip discount calculated, there
Use the [ ] and [ ] to scroll between the
9.
Note: See setting description below.
If Auto Percent is selected, enter the low
10.
A
CTION
options, find the tip that you wish to edit
and then press [ENTER].
Or
selection.
and On then press [ENTER] to select.
continue.
Using the method described in Editing
Header, enter the 13-character tip
designation. Press [ENTER] when the
name has been entered.
keep the existing name.
and On then press [ENTER] to select.
must be a Tip Discount percentage under
Report Setup in the Report Menu.
settings then press [ENTER] to select.
tip percentage then press [ENTER].
Continued
TIP OPTIONS:
1. Tip 1: (ON)
2. Tip 2: (OFF)
3. Tip 3: (OFF)
4. Tab op
Tip 1 (ON)
1. OFF
2. ON
TIP 1 Name: 1 N
Tip
Discounted Tip:
1.OFF
2.ON
TIP 1 OPTIONS:
1.In Tip Menu
2.In Transaction
3.Auto Percent
TIP 1 OPTIONS:
1.In Tip Menu
2.In Transaction
3.Auto Percent
0
NURIT 8000 SECURE
D
ISPLAY
LOW % OF SUM
Continued on next page.
User Guide
160