Removing The Battery Pack - Lipman Nurit 8000 Secure User Manual

A POS_STD POS_PLUS – QSP – V
PPLICATION AND

Removing the Battery Pack

I
NSTRUCTION
Step
1.
2.
3.
4.
Connecting the AC Charger
I
NSTRUCTION
Step
1.
2.
3.
Note: When the charger's LED indicator light is green; the battery is on trickle charge. The
LED light is red when charging (battery is less than 98% changed). If LED indicator is
not illuminated, the charger is disconnected from the wall outlet.
Installation Guide
. 4_82
ER
Use the following step/action table when removing the battery pack:
Hold the terminal in hand or gently place the unit on a
soft sponge-like surface in order not to damage the LCD
screen.
Remove the battery pack from the back of the unit by
grasping the pack's locking snap with a finger or
ballpoint pen.
Lift the pack away from the unit.
Stop.
The NURIT 8000 SECURE can be operated from an AC wall outlet by using
the supplied AC charger. Use the following step/action table for assistance.
Plug the connector at the end of the adapter cord into the "power" port
on the left side of the NURIT's front panel.
Plug the AC charger into an electrical outlet.
Stop.
Action
Action
NURIT 8000 S
ECURE
Step 1
Step 2
18