Advertisement
30" ELECTRIC RANGE INSTALLATION INSTRUCTIONS
C. Level and position the range - Slide range to its
final position. Insert the range leveling leg in the anti-
tip bracket. Visually verify if the anti-tip bracket is
engaged. Lower the range by adjusting the 4 leveling
legs alternatively until the range is level. Check if the
range is level by placing a spirit level on the oven rack.
Take 2 readings with the spirit level placed diagonally;
take a reading in one direction and then in the other
direction. Level the range if necessary by adjusting the
leveling legs.
Range side
Figure 4
Leg
Leveler
Figure 3
Raise
Lower
Figure 5
4. Serial Plate Information
The serial plate
is located as
shown. See the
serial plate for
the following
information:
A. Model, lot and
serial number of
range.
B. Kilowatt
rating (power
requirements).
C. Voltage ratings.
3
Figure 6
Advertisement
