Things You Should Know About Your Uconnect™ Phone - Jeep Grand Cherokee Owner's Manual

"select" or "delete" a paired phone being
announced, press the
"Select" or "Delete." Also, see the next two
sections for an alternate way to "select" or
"delete" a paired phone.
Select Another Cellular Phone
This feature allows you to select and start using
another phone paired with the uconnect™
phone.
• Press the
button to begin.
• After the Ready prompt and the following
beep, say Setup Select Phone and follow
the prompts.
• You can also press the
time while the list is being played, and then
choose the phone that you wish to select.
• The selected phone will be used for the next
phone call. If the selected phone is not
available, the uconnect™ phone will return to
using the highest priority phone present in or
near (approximately within 30 ft [9 m]) the
vehicle.
62
Delete uconnect™ phone Paired Cellular
button and say Phones
• Press the
• After the Ready prompt and the following
beep, say Setup Phone Pairing.
• At the next prompt, say Delete and follow
the prompts.
• You can also press the
time while the list is being played, and then
choose the phone you wish to delete.
Things You Should Know About
Your uconnect™ phone
uconnect™ phone Tutorial
button at any
To hear a brief tutorial of the uconnect™ phone
features, press the
"uconnect™ Tutorial."
Voice Training
For users experiencing difficulty with the
uconnect™ phone recognizing their voice com-
mands or numbers, the uconnect™ phone
button to begin.
button at any
button and say
Voice Training feature may be used. To enter
this training mode, follow one of the two follow-
ing procedures:
From outside the uconnect™ phone mode
(e.g., from radio mode)
• Press and hold the
button for five sec-
onds until the session begins, or,
• Press the
button and say the Setup,
Voice Training command.
Repeat the words and phrases when prompted
by the uconnect™ phone. For best results, the
Voice Training session should be completed
when the vehicle is parked with the engine
running, all windows closed, and the blower fan
switched OFF.
This procedure may be repeated with a new
user. The system will adapt to the last trained
voice only.
To restore the Voice Recognition system to
factory default settings, enter the Voice Training
session via the above procedure and follow the
prompts.