Power Folding Outside Mirrors - If Equipped; Outside Mirrors; Heated Mirrors - If Equipped; Power Outside Mirrors - Jeep Grand Cherokee Owner's Manual

Power Folding Outside Mirrors — If
Equipped
Turn the power mirror knob all the way down to
the left or right to fold in the mirrors. Turn the
knob back upward to the left mirror, right mirror
or off (center) position to the normal (unfolded)
driving position.
Power Mirror Knob
Both mirrors will always move together and will
fold anytime the knob is turned. The ignition
switch does not have to be in the ON position.
NOTE:
The power mirror knob must be used to
return the mirror from the folded position
50
back to the normal driving position. If the
folded mirror is returned to the normal posi-
tion by external forces (automated car wash
equipment, etc.), the operator must still use
the power mirror switch button to return the
mirror's power fold motors to the driving
position. Failure to do so will result in mirror
shake during driving.

Outside Mirrors

To receive maximum benefit, adjust the outside
mirrors to center on the adjacent lane of traffic
with a slight overlap of the view obtained on the
inside mirror.
WARNING!
Vehicles and other objects seen in the pas-
senger side convex mirror will look smaller
and farther away than they really are. Relying
too much on your passenger side mirror could
cause you to collide with another vehicle or
other objects. Use your inside mirror when
judging the size or distance of a vehicle seen
in the passenger side mirror.
Heated Mirrors — If Equipped
These mirrors are heated to melt frost
or ice. This feature is activated when-
ever you turn on the rear window de-
froster. Refer to "Rear Window Features" in this
section, for further information.

Power Outside Mirrors

The power mirror switch is located on the
driver's door trim panel next to the power door
lock switch. A rotary knob selects the left mirror,
right mirror or off position.
After selecting a mirror, move the knob in the
same direction you want the mirror to move.
Use the off (center) position to guard against
accidentally moving a mirror position.