Compass Display - Jeep Grand Cherokee Owner's Manual

Trip B
Shows the total distance traveled for Trip B
since the last reset.
Elapsed Time
Shows the total elapsed time of travel since the
last reset when the ignition switch is in the ACC
position. Elapsed time will increment when the
ignition switch is in the ON or START position.
Display Units of Measure In
To make your selection, press and release the
FUNCTION SELECT button until "ENGLISH" or
"METRIC" appears.
To Reset The Display
Reset will only occur while a resettable function
is being displayed. Press and release the
FUNCTION SELECT button once to clear the
resettable function being displayed. To reset all
resettable functions, press and hold the FUNC-
TION SELECT button for two seconds. Current
display will reset along with other functions

Compass Display

The compass readings indicate
the direction the vehicle is facing.
Press and release the COMPASS/
TEMPERATURE button to display
one of eight compass readings
and the outside temperature.
Automatic Compass Calibration
When the vehicle is new, the compass may
appear erratic and the EVIC will display "CAL"
until the compass is calibrated. To complete
the calibration process, drive slowly (5 mph/
8 km/h) in one or more complete circles in an
area, free from magnetic material until the CAL
indicator displayed in the EVIC turns off. The
Compass will now function normally.
NOTE:
A good calibration requires a level surface
and an environment free from large metallic
objects such as buildings, bridges, under-
ground cables, railroad tracks, etc.
121