Advertisement
1. INSTALLATION
Check
and
make
sure
accessories are included:
This Operation Manual
Indicator x 1
Mains adapter x 1
Assembled platform x 1
Stainless steel platform cover x 1
L shape indicator platform mount support x 1
U shape indicator wall mount support x 1
Pillar, pillar mounting set + screws and tool
set x 1 (Option)
Contact your dealer if any items missed.
2. Insert stainless platform cover into the
platform in the same direction as the
platform. Always insert the platform cover
to the platform gently, no excessive force
is needed.
3. Fixing the Indicator
3.1 Platform Mount
3.1.1 Connect the cable plug from the
platform to the indicator receiving
that
the
following
plug.
3.1.2 Secure
the
connection
turning the plug screw in clockwise
direction.
3.1.3 Insert the indicator to the L shape
support, with the back of the indicator
against the platform.
NOTE:
The indicator could be mounted to the platform
in either longitude or latitude direction.
Default mounting is in longitude direction.
To change mounting direction, remove the
screws
of
the
platform
underneath the platform, then move the
support to the alternate mounting area and
fix it with the screw.
3.2 Wall Mount
3.2.1 Install the supplied U shape support
to a strong wall surface. Secure the
support to the wall with screws
supplied. In no circumstance the
extended cable length should excess
100cm.
3.2.2 Connect the cable plug from the
platform to the indicator receiving
firmly
by
mount
support
Advertisement
