Adjusting Copy Settings; Enlarging Or Reducing A Document; Enlarging Or Reducing A Photo - Kodak ESP 3200 Series Start Here Manual

Adjusting copy settings

Enlarging or
reducing a
document
Enlarging or
reducing a photo
You can change the copy settings for individual copy tasks. A few of the common
tasks are described below.
To enlarge or reduce the size of your copy:
1. Lift the scanner lid, and place the document face down on the glass.
Note the orientation of the paper on the glass and make sure the paper is flush
to the edges.
2. Close the lid.
3. Press Home .
4. If needed, press
5. Press OK .
to select Copy Size .
6. Press
7. Press or to select the enlargement or reduction you want.
NOTE: If you select Fit to Page , the printer detects the size of the original on the
scanner glass and the size of the paper in the paper tray, and automatically
reduces or enlarges the original so that the copy fits on the paper
8. Press Start to begin copying.
To enlarge or reduce the size of your copy:
1. Lift the scanner lid, and place the photo face down on the glass.
2. Close the lid.
3. Press Home .
4. If needed, press
5. Press OK .
6. Press to select Copy Size .
7. Press or to select the photo size you want.
8. Press Start to begin copying.
www.kodak.com/go/aiosupport
KODAK ESP 3200 Series All-in-One Printer
or to select Copy Document .
or to select Copy Photo .
19