Setting Dbs Receiver Output Channel & Brand - JVC HR-S7800U Instructions Manual

Turn on the VCR and the TV, and select the VCR
channel 3 or 4 (or AV mode) on the TV.
POWER
DIGITAL TBC/NR
S-VIDEO VIDEO (MONO)L—AUDIO—R
S-VHS ET
1
4
7
1
2
Setting DBS receiver output channel
& brand
After installation, set the DBS receiver's output channel
and its brand correctly; otherwise, the Controller cannot
work correctly.
1
Turn on DBS receiver
Select a channel other than channel 55, 100 or
205 on your DBS receiver.
3 4
2
REW
MENU
SP EP CH
VCR REC
OK
3 – 5
2 3
2
5 6
8 9
0
4
3 4
3 – 5
2
Access Main Menu screen on VCR
Press MENU.
3
Access Initial Set screen
On the front panel:
Press CH5∞ to move the highlight bar (arrow) to
"INITIAL SET", then press OK.
On the Remote:
Press SHUTTLE PLUS %fi to move the highlight
FF
bar (arrow) to "INITIAL SET", then press OK or
PLAY
SHUTTLE PLUS #.
STOP/EJECT PAUSE
4
Access DBS Receiver Set screen
On the front panel:
Press CH5∞ to move
the highlight bar (arrow)
to "DBS RECEIVER
SET", then press OK.
On the Remote:
Press SHUTTLE PLUS
%fi to move the highlight bar (arrow) to "DBS
RECEIVER SET", then press OK or SHUTTLE
PLUS #.
5
Select DBS receiver output channel
Your selection depends
on how your DBS
receiver is connected to
your VCR.
If your DBS receiver
is connected to your
VCR's ANTENNA IN
terminal on the rear
Press CH 5∞ on the front panel or SHUTTLE
PLUS %fi on the Remote until the channel
number representing the DBS receiver's output
(CH3 or CH4) appears on the screen.
If your DBS receiver is connected to your VCR's
AUDIO/VIDEO IN connectors on the front panel
Press CH 5∞ on the front panel or SHUTTLE
PLUS %fi on the Remote until "ON F-1
(FRONT)" appears on the screen.
If your DBS receiver is connected to your VCR's
AUDIO/VIDEO IN connectors on the rear panel
Press CH 5∞ on the front panel or SHUTTLE
PLUS %fi on the Remote until "ON L-1
(REAR)" appears on the screen.
If you do not use a DBS receiver
Press CH 5∞ on the front panel or SHUTTLE
PLUS %fi on the Remote until "OFF" appears
on the screen.
EN
INITIAL SET
CLOCK SET
LANGUAGE
GUIDE CHANNEL SET
CABLE BOX SET
= DBS RECEIVER SET
SELECT WITH (5,∞) AND (OK)
PRESS (MENU) TO END
DBS RECEIVER SET
OFF
PRESS (5,∞), THEN (OK)
PRESS (MENU) TO END
CONTINUED ON NEXT PAGE \
19
ENGLISH