Table of Contents
Advertisement
Procedure
1.
Press
for 2 seconds to access the
+
2.
Press
until the 'system listener' role is proposed
+
3.
Press
for 2 seconds to access the listener selection screen
4.
Press
OK
to enter
5.
+
-
Press
or
to select a device
6.
Press
OK
to update
7.
When these modifications are finished, press
Setting the Volume
To set a device's volume, proceed as follows:
1.
Make sure you are on the main screen. Press the
seconds
2.
You will hear a beep
3.
To modify the volume, press
indicates either the maximum or minimum volume level has been
reached
4.
Press
OK
to confirm.
Locking and Unlocking the Keypad
When you have finished configuring Condor, it is recommended that you lock
the device's keypad.
Procedure
1.
In the main screen, press
Only the On/Off buttons will now function.
2.
Only the On/Off buttons will not be locked.
3.
To unlock the keypad press
disappears.
N
OTE
The keypad is automatically locked when the device is switched on.
Role setting
to exit.
+
or
+
-
or
. A double beep sound
OK
for 2 seconds until
OK
for 2 seconds until the
Condor
screen
-
key for 2
appears.
12
Advertisement
Table of Contents
