Enabling Devices To Enter A Conference - Phonak Condor User Manual

3. Enabling Devices to Enter a Conference

To enable conference communication, devices must first memorize an
encryption key provided by device 01. This is necessary:
To enable all the devices to enter the conference.
To add a new device to an existing conference.
I
MPORTANT
Devices cannot communicate if this encryption procedure has not been first
carried out.
Procedure
Make sure that the following requirements have been met before starting the
following encryption procedure:
All devices are set to the same table.
Only one device is using the identifier 01.
Operations
on device 01
1. On all the devices, press for 2 seconds to access the
Setting menu.
2. On all the devices, press
3. On all the devices, press OK to proceed.
5. When the encryption
procedure has been validated on
all other devices, press OK
end the procedure.
Operations
on other Condor devices
Device
2 times to access encryption mode.
4. When a device has received
the encryption key from device 01, it
indicates encryption **DONE**. Press
OK to confirm.
to
Condor
10