Table of Contents
Advertisement
CHAPTER 4
BIOS Setup Information
The built-in Mini-ITX board is equipped with the Award BIOS stored in Flash ROM. This BIOS has a built-in Setup program
that allows users to modify the basic system configuration easily. This type of information is stored in the CMOS RAM so
and is retained during power-off periods. When the system is turned on, the built-in Mini-ITX board communicates with
peripheral devices and checks its hardware resources against the configuration information stored in the CMOS memory.
If any error is detected, or if the CMOS parameters need to be initially defined, the diagnostic program will prompt the user
to enter the Setup program. Some errors are significant enough to abort the start-up.
4.1 Entering Setup
Turn on or reboot the computer. When the message Hit <DEL> if you want to run SETUP appears, press the DEL key
immediately to enter BIOS setup program.
If the message disappears before you respond, but you still wish to enter Setup, please restart the system with a cold boot
by turning the system OFF and then ON, or touch the RESET button. You may also restart the system from a warm boot
by pressing the CTRL + ALT + DEL keys simultaneously. If you do not press the keys at the right time and the system
does not boot, an error message will be displayed and you will again be asked to:
Press <F1> to Run SETUP or Resume
In the HIFLEX BIOS setup, you can use the keyboard to choose among options or modify the system parameters to
match the options with your system. The table below will show you all of keystroke functions in BIOS setup.
110912
PRODUCT MANUAL PPC65
44
Advertisement
Table of Contents
