Introduction - Heatrae Sadia Aquatap Installation & User's Instructions

BOIL AND CHILL MODEL (INCLUDING BOIL AND AMBIENT)

1.0 INTRODUCTION

Thank you for purchasing a Heatrae Sadia AQUATAP unit. This unit is manufactured to the
highest standards and has been designed to meet all the latest relevant constructional and safety
specifications.
The AQUATAP unit must be installed (see Sections 3.0, page 7 to 9.0, page 14), commissioned (see
Section 10.0, page 15) and maintained (see Section 12.0, page 20) by a competent person. Please
read and understand these instructions prior to installing your AQUATAP unit. Following installation
and commissioning of the unit, the operation of the AQUATAP should be explained and demonstrated
to the user. Instructions for use are explained in Section 11.0, page 19. These instructions should
be left with the user for future reference.
This appliance is not intended for use by persons (including children) with reduced physical, sensory
or mental capabilities, or lack of experience and knowledge, unless they have been given supervision
or instruction concerning the use of the appliance by a person responsible for their safety. Children
should be supervised to ensure that they do not play with the appliance.
Intelliboil Plus is a patented control system for managing the efficiency of Aquatap's boiling cycle.
TM
It regularly brings the contents of the water container to boil in response to ongoing user demand.
However, when there has been no draw off for a period of one hour, Intelliboil
stored water temperature. This avoids unnecessary boiling - possibly for a number of hours or even
days - until there is renewed user demand. When this occurs, the boiling cycle resumes.
The appliance is intended to be used in commercial applications such as:
• Hotel conference suites
• Waiting rooms
• Staff room kitchens/rest rooms
COMPONENT CHECKLIST
Before commencing installation, please check that all the following components have been supplied
in the packaging:
• Aquatap dispensing tap (Boil and Chill/Ambient Model)
• Aquatap water heating unit
• Control housing
• Heatrae Sadia Superchill 30B (Boil and Chill Model)
• 3 x 1.0m hose
• 6 x hose clamps
• Reducing bush
• 8mm straight push fit adaptor
Plus steps back the
TM
3