JVC HR-P110AG Instructions Manual page 12

12
Shuttle search playback
Use this feature during playback to visually
locate any point on a recorded cassette. The
sound will be cut during shuttle search
operation.
During playback:
A
Press or
Á
search forward or reverse.
Press Á to 1 again to perform high
8
speed.
NOTE:
Each time you press Á or 1 , the search
speed changes between low-speed and
high-speed.
Tracking adjustment
Automatic tracking is adjusted each time a
cassette is inserted in the video cassette
player, you may wish to adjust tracking
manually during playback.
Manual tracking:
A
Press the remote control's AUTO.
B
Press the remote control's
TRACKING + or – to adjust tracking.
Press AUTO to return to automatic
8
tracking.
Counter reset
A
Press 0000 to reset the counter.
to engage shuttle
1
Repeat playback
Use this feature to repeat playback of a
cassette 100 times.
During playback:
A
Press $ for more than 5 seconds.
The Play indicator will blink slowly
and playback of the cassette will
repeat 100 times automatically.
B
Press 8 to stop repeat playback.
Tape playback will be stopped and the
repeat playback mode will be cancelled.
NOTE:
Pressing $, 1 , Á or 8 also stops repeat
playback.
Rewind playback or power off
When the tape has finished rewinding, the
Video cassette player will playback or turn
itself off.
During stop:
a- For Automatic Start Of Playback
Press 1 , then press
seconds.
b- For Automatic Power Off
Press 1 , then press 1 within 2
seconds.
ATTENTION:
In the search, still, slow-motion or frame
advance mode,
• the picture will be distorted.
• the noise bars will appear.
• there will be loss of colour.
• the picture may not appear.
However, this is not malfunction.
Playback
within 2
$