Table of Contents
Related Manuals for JVC HR-P82A
Summary of Contents for JVC HR-P82A
- Page 1 VIDEO CASSETTE PLAYER HR - P82A VIDEO CASSETTE PLAYER HR-P82A INSTRUCTIONS IB.E.S.T. PICTURE OPERATE STANDBY AUDIO NTSC MONITOR PLAYBACK ON PAL TV NTSC3.58 [ L ] [ R ] HiFi PAL NTSC NTSC4.43 B.E.S.T. PAL NTSC LPT0002-0G3A...
-
Page 2: Table Of Contents
Table of contents Thank you for purchasing this JVC video cassette player. To ensure optimum performance of this unit, please read this instruction manual thoroughly. Precautions ... 2 Controls and terminals ... 3 Wireless remote control ... 4 Connections ... 5 Setting the video channel ... -
Page 3: Controls And Terminals
Controls and terminals Front panel VIDEO CASSETTE PLAYER HR-P82A OPERATE button To turn the power on and off (standby mode). Cassette loading slot Load the video cassette here. B.E.S.T. PICTURE button To turn the B.E.S.T. (Biconditional Equalized Signal Track- ing) function on and off. -
Page 4: Wireless Remote Control
IB.E.S.T. PICTURE sensor window. PAL NTSC You can also use the player’s remote control to operate a JVC television. Transmitting window TV channel –/+ buttons TV VOLUME –/+ buttons... -
Page 5: Connections
Connections Make sure that the power to the video cassette player and TV is off before making the following connections. Connection A (basic) In order to use the video cassette player it must be connected between the antenna and the TV. Connect your TV antenna cable to the video cassette player’s ANT. -
Page 6: Setting The Video Channel
TV’s video/audio in terminals (connection B of the “Connections” section), set- ting the video channel is not necessary. In this case simply set the TV’s TV/VCR switch to VCR. Turn the video cassette player’s power on and load a pre-recorded video tape. -
Page 7: Playback
Playback NTSC, PAL and MESECAM video tapes can be played back on this video cassette player. Refer to the “Colour system output mode selection” section for details. Before proceeding: Turn on the power of the TV and video cassette player. Make sure that the TV is set to the video channel or that the TV’s TV/VIDEO switch is set to VIDEO (refer to the “Setting the video channel”... -
Page 8: Playback Features
Press the Stop 7 button to stop repeat playback. Tape playback will be stopped and the repeat playback mode will be cancelled. Rewind power off When the tape has finished rewinding, the VCR will turn itself off. During stop: Press the Rewind 1 button. -
Page 9: Recording
Recording Use the following procedure to record TV programmes on a blank video tape. Before proceeding: To record TV programmes, the video cassette player must be connected to the TV as shown in connection B of the “Connections” section. Turn on the power of the TV and video cassette player. Make sure that the video cassette’s safety tab is intact. -
Page 10: B.e.s.t. Picture System
B.E.S.T. picture system The B.E.S.T. (Biconditional Equalized Signal Tracking) system checks the condition of the tape in use during recording and playback, and compensates to provide the highest-possible recording and playback pictures. The default setting for both recording and playback is “ON”. Recording Insert a cassette with the record safety tab intact. -
Page 11: Troubleshooting
7 Dirt accumulated on the video heads after long periods of use causes such troubles. In this case, head cleaning requiring highly technical care is necessary. 7 For head cleaning, consult the nearest JVC dealer. Specifications Format ... VHS Standard Video recording system ...