Related Manuals for JVC HR-P91K
Summary of Contents for JVC HR-P91K
- Page 1 VIDEO CASSETTE PLAYER HR - P91K MONITOR VIDEO CASSETTE PLAYER HR-P91K INSTRUCTIONS DIGITAL ECHO OPERATE STANDBY AUDIO NTSC ON PAL TV NTSC3.58 PAL NTSC NTSC4.43 PAL NTSC PU30425-1937...
-
Page 2: Table Of Contents
Table of contents Thank you for purchasing this JVC video cassette player. To ensure optimum performance of this unit, please read this instruction manual thoroughly. Precautions ... 2 Controls and terminals ... 3 Wireless remote control ... 4 Connections ... 5 Setting the video channel ... -
Page 3: Controls And Terminals
Controls and terminals Front panel VIDEO CASSETTE PLAYER HR-P91K OPERATE button To turn the power on and off (standby mode). Cassette loading slot Load the video cassette here. Karaoke search 4 ¢ buttons To search for the blank portion between tunes on the tape. -
Page 4: Wireless Remote Control
When using the remote control for operation of the video cassette player, make sure that it is pointed at the remote sensor window. You can also use the player’s remote control to operate a JVC PAL NTSC television. Transmitting window TV channel –/+ buttons... -
Page 5: Connections
Connections Make sure that the power to the video cassette player and TV is off before making the following connections. Connection A (basic) In order to use the video cassette player it must be connected between the antenna and the TV. Connect your TV antenna cable to the video cassette player’s ANT. -
Page 6: Setting The Video Channel
TV’s video/audio in terminals (connection B of the “Connections” section), set- ting the video channel is not necessary. In this case simply set the TV’s TV/VCR switch to VCR. Turn the video cassette player’s power on and load a pre-recorded video tape. -
Page 7: Playback
Playback NTSC, PAL and MESECAM video tapes can be played back on this video cassette player. Refer to the “Colour system output mode selection” section for details. Before proceeding: Turn on the power of the TV and video cassette player. Make sure that the TV is set to the video channel or that the TV’s TV/VIDEO switch is set to VIDEO (refer to the “Setting the video channel”... -
Page 8: Playback Features
Tape playback will be stopped and the repeat playback mode will be cancelled. Rewind power off When the tape has finished rewinding, the VCR will turn itself off. During stop: Press the Rewind 1 button. Press the OPERATE button within 2 seconds. -
Page 9: Recording
Recording Use the following procedure to record TV programmes on a blank video tape. Before proceeding: To record TV programmes, the video cassette player must be connected to the TV as shown in connection B of the “Connections” section. Turn on the power of the TV and video cassette player. Make sure that the video cassette’s safety tab is intact. - Page 10 Karaoke features (cont’d) Connecting to Hi-Fi stereo system FM tuner Stereo amplifier Television Speaker VIDEO IN To aerial terminal If you have a Hi-Fi stereo system, you can connect your video player to it so that the sound can be heard through your Hi-Fi system.
-
Page 11: Editing
7 Dirt accumulated on the video heads after long periods of use causes such troubles. In this case, head cleaning requiring highly technical care is necessary. 7 For head cleaning, consult the nearest JVC dealer. Problem Check point Is the power cord plugged... -
Page 12: Specifications
Specifications Format ... VHS Standard Video recording system ... Rotary, slant azimuth two-head helical scan system Rotary heads ... 2 video heads RF output ... System G/K type modulation UHF ch 32 – 40 adjustable (preset ch 36) Recording (line input) ... PAL, SECAM (MESECAM tape) NTSC 3.58, NTSC 4.43 Playback (line output) ... - Page 13 MEMO...
- Page 14 VICTOR COMPANY OF JAPAN, LIMITED Printed In Japan COPYRIGHT 1996 VICTOR COMPANY OF JAPAN, LTD. 0896 YSV*YP*YP...