1. Manuals
  2. Brands
  3. netsys Manuals
  4. Network Hardware
  5. NVF-2400S
  6. User manual

netsys NVF-2400S User Manual

4 band vdsl 24 ports managed ip dslam
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
4
B
a
n
d
V
D
S
L
2
4
4
B
a
n
d
V
D
S
L
2
4
4
B
a
n
d
V
D
S
L
2
4
N
V
F
-
2
N
V
F
-
2
N
V
F
-
2
P
o
r
t
s
M
a
n
a
g
e
d
P
o
r
t
s
M
a
n
a
g
e
d
P
o
r
t
s
M
a
n
a
g
e
d
U
S
E
R
'
S
M
U
S
E
R
'
S
M
U
S
E
R
'
S
M
4
0
0
S
4
0
0
S
4
0
0
S
I
P
D
S
L
A
M
w
i
t
h
I
P
D
S
L
A
M
w
i
t
h
I
P
D
S
L
A
M
w
i
t
h
A
N
U
A
L
A
N
U
A
L
A
N
U
A
L
2
G
i
g
a
E
t
h
e
r
n
e
t
2
G
i
g
a
E
t
h
e
r
n
e
t
2
G
i
g
a
E
t
h
e
r
n
e
t

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the NVF-2400S and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for netsys NVF-2400S

Summary of Contents for netsys NVF-2400S

  • Page 1 ’ ’ ’...

  • Page 2: Copyright

    In the interest of improving internal design, operational function, and/or reliability, NETSYS reserves the right to make changes to the products described in this document without notice. NETSYS does not assume any liability that may occur due to the use or application of the product(s) or circuit layout(s) described herein.

  • Page 3: Foreword:vdsl Solution

    VOD (Video on demand) and SNMP RMON management and Web-based Switch network management. The NVF-2400S is a bridge between external Internet backbone through a router for IP sharing and the building 110D telephone rack mount or telephone box. It utilizes the available telephone wire to enable high-speed Internet access to building’s residents.

  • Page 4: Ports Vdsl + 2 Giga Ethernet

    24 Ports VDSL + 2 Giga Ethernet The NVF-2400S provide 1 x RJ-21 (24 x POTS Ports) with splitter on board, 1 x RJ-21 (24 x VDSL Ports) and 2 x 10/100/1000Mbps auto-sensing RJ-45. The NVF-2400S is a rack-unit (1.5RU) high, 299 mm deep. It is a standard 19” Rack mounted size. The NVF-2400S delivers dedicated bandwidth per port at rates up to 25 Mbps.
  • Page 5 NVF-2400S provides a console port for setup IP or other function. NVF-2400S support remote control by Telnet and Web-based Management easy-to-use configuration and ongoing monitoring. This software is embedded in the NVF-2400S and delivers remote, intuitive management of NVF-2400S and connected VDSL CPE devices through a single Out of Band Management: IP address.
  • Page 6 This function can be auto sensing client interface media with Copper or fiber optic and link one and supports: supports hot swap. In order to make sure the system is working normally, the NVF-2400S provides Fan and Temperature monitor and management, you can see through WEB or Telnet which shows the Alarm: internal temperature and fan speed, if the temperature exceeds 70°C or the fan stops working, the...

  • Page 7: Safety Warnings

    NVF-2400S 4 Band VDSL 24 Ports Managed IP DSLAM USER’S MANUAL Ver_A.8 Safety Warnings For your safety, be sure to read and follow all warning notices and instructions before using the device. • DO NOT open the device or unit. Opening or removing covers can expose you to dangerous high voltage points or other risks.

  • Page 8: Table Of Contents

    NVF-2400S 4 Band VDSL 24 Ports Managed IP DSLAM USER’S MANUAL Ver_A.8 Table of Contents COPYRIGHT.........................................1 FOREWORD:VDSL SOLUTION ...................................2 24 PORTS VDSL + 2 GIGA ETHERNET................................3 SAFETY WARNINGS......................................6 CHAPTER 1. UNPACKING INFORMATION ...............................14 1.1 Check List ....................................14 1.2 Package Contents..................................14 CHAPTER 2.
  • Page 9 NVF-2400S 4 Band VDSL 24 Ports Managed IP DSLAM USER’S MANUAL Ver_A.8 CHAPTER 3. COMPLETE INSTALLATION ................................19 3.1 Hardware Installation .................................19 3.2 Pre-installation Requirements ..............................19 3.3 General Rules .....................................20 3.4 NVF-2400S Connections ................................20 3.5 Ethernet Ports Connections ..............................21 3.6 VDSL Ports Connections ................................21 3.7 Basic Configuration..................................22...
  • Page 10 NVF-2400S 4 Band VDSL 24 Ports Managed IP DSLAM USER’S MANUAL Ver_A.8 4.1.1.1.3.4 Group Sorted Mode................................38 4.1.1.1.4 Misc Configuration..................................39 4.1.1.1.4.1 MAC Age Interval................................40 4.1.1.1.4.2 Broadcast Storm Filtering..............................41 4.1.1.1.4.3 Max Bridge Transmit Delay Bound ..........................42 4.1.1.1.4.4 Collisions Retry Forever ..............................43 4.1.1.1.4.5 Hash Algorithm.................................44 4.1.1.1.5 Administration Configuration..............................45...
  • Page 11 NVF-2400S 4 Band VDSL 24 Ports Managed IP DSLAM USER’S MANUAL Ver_A.8 4.1.1.2.2.1 System Options ................................66 4.1.1.2.2.2 Community Strings ................................67 4.1.1.2.2.3 Trap Managers..................................69 4.1.1.2.3 GVRP......................................71 4.1.1.2.4 IGMP......................................72 4.1.1.2.5 LACP ......................................73 4.1.1.2.5.1 Working Ports Setting..............................74 4.1.1.2.5.2 State Activity..................................75 4.1.1.2.5.3 LACP Status..................................76 4.1.1.2.6 802.1X ......................................77...
  • Page 12 NVF-2400S 4 Band VDSL 24 Ports Managed IP DSLAM USER’S MANUAL Ver_A.8 4.1.1.6.2 TFTP Restore Configuration..............................93 4.1.1.6.3 TFTP Backup Configuration ..............................94 4.1.1.7 LOGOUT .........................................95 4.2 Remote Network Management ..............................96 4.2.1 IP Setting ....................................96 4.3 Web Basic Management................................98 4.3.1 Port Status .....................................98 4.3.2 Port Statistics ..................................99...
  • Page 13 NVF-2400S 4 Band VDSL 24 Ports Managed IP DSLAM USER’S MANUAL Ver_A.8 4.4.11 802.1X Config..................................129 4.4.12 Bridge Location ..................................131 4.4.13 Interleave ...................................132 4.4.14 Reset System..................................135 4.4.15 Reboot ....................................135 CHAPTER 5. APPLICATIONS ..................................136 APPENDIX A: RJ-21 TELCO PORTS DISTRIBUTION.............................139 APPENDIX B: VDSL SPECTRUM ..................................142 APPENDIX C: PRODUCT SPECIFICATION..............................143...
  • Page 14 NVF-2400S 4 Band VDSL 24 Ports Managed IP DSLAM USER’S MANUAL Ver_A.8 CHINESE SJ/T 11364-2006 ....................................163...

  • Page 15: Chapter 1. Unpacking Information

    NVF-2400S 4 Band VDSL 24 Ports Managed IP DSLAM USER’S MANUAL Ver_A.8 CHAPTER 1. UNPACKING INFORMATION 1.1 Check List Carefully unpack the package and check its contents against the checklist. 1.2 Package Contents • 1 x NVF-2400S VDSL IP DSLAM •...

  • Page 16: Chapter 2. General Description

    NVF-2400S 4 Band VDSL 24 Ports Managed IP DSLAM USER’S MANUAL Ver_A.8 Chapter 2. General Description 2.1 Hardware Description This section describes the important parts of the NVF-2400S. It features the front indicators and rear connectors. NVF-2400S Outward 2.2 Front Panel The following figure shows the front panel.
  • Page 17 NVF-2400S 4 Band VDSL 24 Ports Managed IP DSLAM USER’S MANUAL Ver_A.8 Tip: The NVF-2400S has Splitter embedded between each VDSL and POTS. It permits delivery of broadband service on the same lines as Plain Old Telephone Service (POTS), ISDN traffic and VDSL Signal.

  • Page 18: Front Indicators

    NVF-2400S 4 Band VDSL 24 Ports Managed IP DSLAM USER’S MANUAL Ver_A.8 2.3 Front Indicators The following describes the function of each LED indicator. (Table 2-1) Table 2-1 LED Indicators Description and Operation LEDs Color Status Descriptions This LED light is located at the left side on the front panel. It will light up (ON) to show that Green Steady the product is receiving power.

  • Page 19: Rear Panel

    NVF-2400S 4 Band VDSL 24 Ports Managed IP DSLAM USER’S MANUAL Ver_A.8 2.4 Rear Panel The following figure shows the rear connectors. (Figure 2.2) Figure 2.2 Rear Panel description Note: AC Power Socket: The power cord should be plug into this socket. The AC Socket accepts AC power 100 to 240 voltage.

  • Page 20: Chapter 3. Complete Installation

    3.1 Hardware Installation This chapter describes how to install the NVF-2400S to establish network connection. You may install the IP DSLAM on any level surface (table, shelf, 19 inch rack or wall mounting). However, please take note of the following minimum site requirements before you begin.

  • Page 21: General Rules

    Ethernet Port (RJ-45) All network connections to the NVF-2400S Ethernet port must be made using Category 5 UTP for 100Mbps and Category 3, 4 UTP for 10Mbps. No more than 100 meters (about 333 feet) of cabling may be use between NVF-2400S or with HUB or an end node.

  • Page 22: Ethernet Ports Connections

    NVF-2400S 4 Band VDSL 24 Ports Managed IP DSLAM USER’S MANUAL Ver_A.8 3.5 Ethernet Ports Connections Ethernet Port “25” and “26” support auto MDI/MDIX. You can connect the “25 or 26” port on the IP DSLAM to any device that uses a standard network interface such as a Cable modem, ADSL modem, Ethernet Switch, workstation or server, or also to a network interconnection device such as a bridge or router (depending on the port type implemented).

  • Page 23: Basic Configuration

    NVF-2400S 4 Band VDSL 24 Ports Managed IP DSLAM USER’S MANUAL Ver_A.8 Note: We advise using Category 5 cable for Cable Modem or Router connections to avoid any confusion or inconvenience in the future when you upgrade attached to high bandwidth devices.

  • Page 24: Chapter 4. Management Configuration

    NVF-2400S 4 Band VDSL 24 Ports Managed IP DSLAM USER’S MANUAL Ver_A.8 Chapter 4. Management Configuration 4.1 In-Band Management Console Port (RS-232) Configuration (Change IP Address via Hyperterminal) 1. Connect IP DSLAM with PC/Laptop’s RS-232 port, launch “Hypert erminal” in the Windows™ system.
  • Page 25 NVF-2400S 4 Band VDSL 24 Ports Managed IP DSLAM USER’S MANUAL Ver_A.8 4. After login window show on the screen, it will ask for Login Name and Password. Login Name: admin, Password: 123 (Figure 4.2) Main Manual window will show on the screen as the following: Figure 4.2 Main Menu...
  • Page 26 NVF-2400S 4 Band VDSL 24 Ports Managed IP DSLAM USER’S MANUAL Ver_A.8 Change the IP Configuration, enter the IP configuration page and follow these steps: (1) Select “Switch Static Configuration” to enter the Switch Configuration page. (Figure 4.3) (2) Select “Administration Configuration” to enter the Device Configuration page.
  • Page 27 NVF-2400S 4 Band VDSL 24 Ports Managed IP DSLAM USER’S MANUAL Ver_A.8 (Figure 4.4) (3) Select “IP Configuration” to enter the IP configuration page. Figure 4.4 IP Configuraiton-2...
  • Page 28 NVF-2400S 4 Band VDSL 24 Ports Managed IP DSLAM USER’S MANUAL Ver_A.8 (Figure 4.5) (4) In the “IP Configuration”, it allows user to setup the DHCP, IP Address, Subnet Mask and Gateway. Figure 4.5 IP Configuraiton-3 a. Select <Edit> to Change IP address, Subnet Mask and Gateway b.

  • Page 29: Main Menu

    NVF-2400S 4 Band VDSL 24 Ports Managed IP DSLAM USER’S MANUAL Ver_A.8 4.1.1 Main Menu There is an easy Setup for end users at the setup of NVF-2400S with Switch Static Configuration, Protocol Related Configuration, Status and Counters, Temperature & Fan...

  • Page 30: Static Switch Configuration

    NVF-2400S 4 Band VDSL 24 Ports Managed IP DSLAM USER’S MANUAL Ver_A.8 4.1.1.1 Static Switch Configuration Select the “Switch Static Configuration”. The menu below includes the sub-menus of Port, Trunk, VLAN, Misc, Administration, Port Mirroring, Priority, Mac Address Main Menu.

  • Page 31: Port Configuration

    NVF-2400S 4 Band VDSL 24 Ports Managed IP DSLAM USER’S MANUAL Ver_A.8 4.1.1.1.1 Port Configuration Display or change port configuration. (Figure 4.8) Item Description Port: Shows the port number of NVF-2400S from ports 1 to 24. Type: Shows the media type of the port’s device.

  • Page 32: Trunk Configuration

    NVF-2400S 4 Band VDSL 24 Ports Managed IP DSLAM USER’S MANUAL Ver_A.8 4.1.1.1.2 Trunk Configuration Display or change trunk configuration. (Figure 4.9) Item Description TRK1 to TRK7: Shows if TRK1 to TRK7 trunk configuration is disabled, static or LACP. Figure 4.9 Trunk Configuration...

  • Page 33: Vlan Configuration

    NVF-2400S 4 Band VDSL 24 Ports Managed IP DSLAM USER’S MANUAL Ver_A.8 4.1.1.1.3 VLAN Configuration Select the “VLAN Configuration”. The menu below includes the sub-menus of VLAN Configure, Create a VLAN Group, Edit/Delete a VLAN Group, Group Sorted Mode. Display or change VLAN (Virtual Local Area Network) configuration.

  • Page 34: Vlan Configure

    NVF-2400S 4 Band VDSL 24 Ports Managed IP DSLAM USER’S MANUAL Ver_A.8 4.1.1.1.3.1 VLAN Configure Configure the VLAN PVID and Ingress/Egress Rule. Item Description User can choose from 4 VLAN modes, respectively, 802.1Q, Port Based and Disable. Default VLAN VLAN Mode: mode is disabled.
  • Page 35 NVF-2400S 4 Band VDSL 24 Ports Managed IP DSLAM USER’S MANUAL Ver_A.8 VLAN Mode: PortBased(Figure 4.12) Figure 4.12 VLAN Mode: Port Based...
  • Page 36 NVF-2400S 4 Band VDSL 24 Ports Managed IP DSLAM USER’S MANUAL Ver_A.8 VLAN Mode: 802.1Q(Figure 4.13) Item Description Port: Shows the port of NVF-2400S VDSL IP DSLAM. PVID: Shows the PVID value. Valid range is from 1 to 4094. IngressFilter1 NonMember Pkt: Shows the packet being dropped or forwarded.

  • Page 37: Create A Vlan Group

    NVF-2400S 4 Band VDSL 24 Ports Managed IP DSLAM USER’S MANUAL Ver_A.8 4.1.1.1.3.2 Create a VLAN Group Create a VLAN Group. (Figure 4.14) Item Description VLAN Name: Input VLAN name valid up to 16 characters. Grp ID: Input VLAN ID, valid range is from 1 to 4094.

  • Page 38: Edit/Delete A Vlan Group

    NVF-2400S 4 Band VDSL 24 Ports Managed IP DSLAM USER’S MANUAL Ver_A.8 4.1.1.1.3.3 Edit/Delete a VLAN Group Edit/Delete a VLAN Group. (Figure 4.15) Figure 4.15 Edit or Delete a VLAN Group...

  • Page 39: Group Sorted Mode

    NVF-2400S 4 Band VDSL 24 Ports Managed IP DSLAM USER’S MANUAL Ver_A.8 4.1.1.1.3.4 Group Sorted Mode Select a group sorted mode. (Figure 4.16) Item Description Group Sorted: Group sorted can either be sorted by name or by VID. Figure 4.16 Group Sorted Mode...

  • Page 40: Misc Configuration

    NVF-2400S 4 Band VDSL 24 Ports Managed IP DSLAM USER’S MANUAL Ver_A.8 4.1.1.1.4 Misc Configuration Select the “Misc Configuration”. The menu below includes the sub-menus of Mac Age interval, Broadcast Storm Filtering, Max bridge transmit delay bound, Collisions Retry Forever Hash Algorithm.

  • Page 41: Mac Age Interval

    NVF-2400S 4 Band VDSL 24 Ports Managed IP DSLAM USER’S MANUAL Ver_A.8 4.1.1.1.4.1 MAC Age Interval Configure the MAC aging time. (Figure 4.18) Item Description MAC Age Interval: MAC aging interval is from 120 to765 seconds ; disabled is 0.

  • Page 42: Broadcast Storm Filtering

    NVF-2400S 4 Band VDSL 24 Ports Managed IP DSLAM USER’S MANUAL Ver_A.8 4.1.1.1.4.2 Broadcast Storm Filtering To configure broadcast storm control, enable it and set the upper threshold for individual ports. The threshold is the percentage of the port's total bandwidth used by broadcast traffic. When broadcast traffic for a port rises above the threshold you set, broadcast storm control becomes active.

  • Page 43: Max Bridge Transmit Delay Bound

    NVF-2400S 4 Band VDSL 24 Ports Managed IP DSLAM USER’S MANUAL Ver_A.8 4.1.1.1.4.3 Max Bridge Transmit Delay Bound Configure the maximum bridge transmit delay bound. Default maximum bridge transmit delay bound is OFF, low queue delay bound is disabled, and low queue max delay time is 255ms.

  • Page 44: Collisions Retry Forever

    NVF-2400S 4 Band VDSL 24 Ports Managed IP DSLAM USER’S MANUAL Ver_A.8 4.1.1.1.4.4 Collisions Retry Forever Default is enabled. (Figure 4.21) Item Description Collisions retry forever can either be enabled or disabled. Collisions Retry Forever: Disable: If happen collision will retry 48 times and then drop frame.

  • Page 45: Hash Algorithm

    NVF-2400S 4 Band VDSL 24 Ports Managed IP DSLAM USER’S MANUAL Ver_A.8 4.1.1.1.4.5 Hash Algorithm Provide CRC or Direct Map. This Hash Algorithm is for hardware maintain on MAC table calculation. (Figure 4.22) Item Description Hash Algorithm: Hash algorithm mode can either be CRC-Hash or DirectMap. Default is at CRC-Hash.

  • Page 46: Administration Configuration

    NVF-2400S 4 Band VDSL 24 Ports Managed IP DSLAM USER’S MANUAL Ver_A.8 4.1.1.1.5 Administration Configuration Select the “Administration Configuration”. The menu below includes the sub-menus of Change Username, Change Password, Device Information configuration. Please configure the Administration items as follows.

  • Page 47: Change Username

    NVF-2400S 4 Band VDSL 24 Ports Managed IP DSLAM USER’S MANUAL Ver_A.8 4.1.1.1.5.1 Change Username Item Description Username: Shows and configure the current username. (Figure 4.24) Figure 4.24 User Name Configuration...

  • Page 48: Change Password

    NVF-2400S 4 Band VDSL 24 Ports Managed IP DSLAM USER’S MANUAL Ver_A.8 4.1.1.1.5.2 Change Password Configure the password, type the numbers will be masked. (Figure 4.25) Item Description Old Password: Type the old password. New Password: Type the new password.

  • Page 49: Device Information

    NVF-2400S 4 Band VDSL 24 Ports Managed IP DSLAM USER’S MANUAL Ver_A.8 4.1.1.1.5.3 Device Information Configure the device information, you can edit and create your own name. (Figure 4.26) Item Description Device Name: Shows the whole device name. Device Description: Shows the description of the device.

  • Page 50: Ip Configuration

    NVF-2400S 4 Band VDSL 24 Ports Managed IP DSLAM USER’S MANUAL Ver_A.8 4.1.1.1.5.4 IP Configuration Configure the IP(Internet Protocol) information. (Figure 4.27) Item Description DHCP: Shows DHCP can either be enabled or disabled. (Default DHCP is disabled) IP Address: Shows the IP address of the device.

  • Page 51: Port Mirroring Configuration

    NVF-2400S 4 Band VDSL 24 Ports Managed IP DSLAM USER’S MANUAL Ver_A.8 4.1.1.1.6 Port Mirroring Configuration Display or change port mirror configuration. (Figure 4.28) Item Description Sniffer mode: Disable (Default Sniffer mode is disabled). Figure 4.28 Sniffer Mode: Disable Tip: This function can special monitor client side as duplicate mail, Http…..etc, but need to be used with the application...
  • Page 52 NVF-2400S 4 Band VDSL 24 Ports Managed IP DSLAM USER’S MANUAL Ver_A.8 Sniffer Mode: Rx (Figure 4.29) Item Description Monitoring Port: Can be selected from Port1 to Port26 as the monitoring port. Monitored Port: Port1 to port26 can be monitored by the monitoring port if it is check as a member.
  • Page 53 NVF-2400S 4 Band VDSL 24 Ports Managed IP DSLAM USER’S MANUAL Ver_A.8 Sniffer Mode: Tx (Figure 4.30) Item Description Monitoring Port: Can be selected from Port1 to Port26 as the monitoring port. Monitored Port: Port1 to port26 can be monitored by the monitoring port if it is check as a member.
  • Page 54 NVF-2400S 4 Band VDSL 24 Ports Managed IP DSLAM USER’S MANUAL Ver_A.8 Sniffer Mode: Both (Figure 4.31) Item Description Monitoring Port: Can be selected from Port1 to Port26 as the monitoring port. Monitored Port: Port1 to port26 can be monitored by the monitoring port if it is check as a member.

  • Page 55: Priority Configuration

    NVF-2400S 4 Band VDSL 24 Ports Managed IP DSLAM USER’S MANUAL Ver_A.8 4.1.1.1.7 Priority Configuration Display or change port priority configuration. (Figure 4.32) Figure 4.32 Priority Configuration...

  • Page 56: Port Static Priority

    NVF-2400S 4 Band VDSL 24 Ports Managed IP DSLAM USER’S MANUAL Ver_A.8 4.1.1.1.7.1 Port Static Priority Configure port static priority. (Figure 4.33) Item Description Port static priorities can either be disabled, low or high, default static priority is Port Static Priority: disabled.

  • Page 57: Priority

    NVF-2400S 4 Band VDSL 24 Ports Managed IP DSLAM USER’S MANUAL Ver_A.8 4.1.1.1.7.2 802.1p Priority Configure 802.1p priority. (Figure 4.34) Item Description First Come First Serve. All High Before Low. Qos Mode: High/Low Queue Service Ratio H:[1] L:[1]. Default QoS Mode is First Come First Serve (FCFS).

  • Page 58: Mac Address Configuration

    NVF-2400S 4 Band VDSL 24 Ports Managed IP DSLAM USER’S MANUAL Ver_A.8 4.1.1.1.8 MAC Address Configuration Select the “Mac Address Configuration”. The menu below includes the sub-menus of Filtering Mac Address. (Figure 4.35) Figure 4.35 Mac address configuration...

  • Page 59: Filtering Mac Address

    NVF-2400S 4 Band VDSL 24 Ports Managed IP DSLAM USER’S MANUAL Ver_A.8 4.1.1.1.8.1 Filtering MAC Address Filtering the MAC address configuration. (Figure 4.36) Figure 4.36 Filter Mac Address Tip: MAC address filtering allows the switch to drop unwanted traffic. Traffic is filtered based on the destination addresses. For example, if your network is congested because of high utilization from one MAC address, you can filter all traffic transmitted from that MAC address, restoring network flow while you troubleshoot the problem.
  • Page 60 NVF-2400S 4 Band VDSL 24 Ports Managed IP DSLAM USER’S MANUAL Ver_A.8 Add filter MAC Address. (Figure 4.37) Item Description Mac Address: Input the MAC address of certain device to be filtered out. Figure 4.37 Add filter Mac Address...

  • Page 61: Protocol Related Configuration

    NVF-2400S 4 Band VDSL 24 Ports Managed IP DSLAM USER’S MANUAL Ver_A.8 4.1.1.2 Protocol Related Configuration Select the “Protocol Related Configuration”. The menu below includes the sub-menus of STP, SNMP, GVRP, IGMP, LACP 802.1X. Please configure the protocol items as follows.

  • Page 62: Stp

    NVF-2400S 4 Band VDSL 24 Ports Managed IP DSLAM USER’S MANUAL Ver_A.8 4.1.1.2.1 STP Select the “STP”. The menu below includes the sub-menus of Enable, System Configuration Perport Configuration. Please configure the STP items as follows. (Figure 4.39) Figure 4.39 Spanning Tree Protocol...

  • Page 63: Stp Enable

    NVF-2400S 4 Band VDSL 24 Ports Managed IP DSLAM USER’S MANUAL Ver_A.8 4.1.1.2.1.1 STP Enable The Spanning-Tree Protocol (STP) is a standardized method (IEEE 802.1d ) for used to prevent forwarding loops on a LAN. When (Figure 4.40) STP enabled, to ensure that only one path at a time is active between any two nodes on the network.

  • Page 64: System Configuration

    NVF-2400S 4 Band VDSL 24 Ports Managed IP DSLAM USER’S MANUAL Ver_A.8 4.1.1.2.1.2 System Configuration Configure the STP system information. (Figure 4.41) Item Description A priority value used to identify the root bridge. The bridge with the lowest value has the highest priority Priority: and is selected as the root.

  • Page 65: Perport Configuration

    NVF-2400S 4 Band VDSL 24 Ports Managed IP DSLAM USER’S MANUAL Ver_A.8 4.1.1.2.1.3 Perport Configuration Configure the STP per port configuration. Default pathcost is 10 and priority is 128. (Figure 4.42) Item Description Port: Shows the port number of NVF-2400S VDSL IP DSLAM.

  • Page 66: Snmp

    NVF-2400S 4 Band VDSL 24 Ports Managed IP DSLAM USER’S MANUAL Ver_A.8 4.1.1.2.2 SNMP Select the “SNMP”. The menu below includes the sub-menus of System Options, Community Strings Trap Mangers. SNMP means Simple Network Manager Protocol. Please configure the SNMP items as follows.

  • Page 67: System Options

    NVF-2400S 4 Band VDSL 24 Ports Managed IP DSLAM USER’S MANUAL Ver_A.8 4.1.1.2.2.1 System Options Configure the system options. (Figure 4.44) Item Description System Name: Configuration to your own system name up to 32 characters. System Contact: Configuration to your own system contact up to 32 characters.

  • Page 68: Community Strings

    NVF-2400S 4 Band VDSL 24 Ports Managed IP DSLAM USER’S MANUAL Ver_A.8 4.1.1.2.2.2 Community Strings Configure the community. (Figure 4.45) For example,community name set to “public”, Write access set to “Restricted”, means enable requests accompanied by this string to display MIB-object information. And another community name set to “private”, Write access set to “Unrestricted”, means enable requests accompanied by this string to display MIB-object information and to set MIB objects.
  • Page 69 NVF-2400S 4 Band VDSL 24 Ports Managed IP DSLAM USER’S MANUAL Ver_A.8 Add SNMP Community(Figure 4.46) Item Description Community Name: Input valid community name up to 32 characters to be included in the SNMP community. Write Access: Write access can either be restricted or unrestricted.

  • Page 70: Trap Managers

    NVF-2400S 4 Band VDSL 24 Ports Managed IP DSLAM USER’S MANUAL Ver_A.8 4.1.1.2.2.3 Trap Managers A trap manager is a management station that receives traps, the system alerts generated by the IP DSLAM. If no trap manager is defined, no traps are issued. Create a trap manager by entering the IP address of the station and a community string.
  • Page 71 NVF-2400S 4 Band VDSL 24 Ports Managed IP DSLAM USER’S MANUAL Ver_A.8 Add SNMP Trap manager. (Figure 4.48) Item Description Input IP address to be included in the SNMP trap manager. Community Name: Input valid community name up to 32 characters to be included in the SNMP trap manager.

  • Page 72: Gvrp

    NVF-2400S 4 Band VDSL 24 Ports Managed IP DSLAM USER’S MANUAL Ver_A.8 4.1.1.2.3 GVRP Configure the GVRP protocol. Default GVRP is disabled. (Figure 4.49) Item Description GVRP: GARP VLAN Registration Protocol can either be enabled or disabled. Figure 4.49 GVRP Configuration Enable / Disable...

  • Page 73: Igmp

    NVF-2400S 4 Band VDSL 24 Ports Managed IP DSLAM USER’S MANUAL Ver_A.8 4.1.1.2.4 IGMP Configure the IGMP protocol. Default IGMP is disabled. (Figure 4.50) Item Description IGMP: Internet Group Management Protocol can either be enabled or disabled. Figure 4.50 IGMP Configuration...

  • Page 74: Lacp

    NVF-2400S 4 Band VDSL 24 Ports Managed IP DSLAM USER’S MANUAL Ver_A.8 4.1.1.2.5 LACP Select the “LACP ”. The menu below includes the sub-menus of Working Ports Setting, State Activity LACP Status. The LACP(Link Aggregation Control Protocol) provides a standardized means for exchanging information between...

  • Page 75: Working Ports Setting

    NVF-2400S 4 Band VDSL 24 Ports Managed IP DSLAM USER’S MANUAL Ver_A.8 4.1.1.2.5.1 Working Ports Setting Configure LACP group. (Figure 4.52) Figure 4.52 LACP Group Configuration...

  • Page 76: State Activity

    NVF-2400S 4 Band VDSL 24 Ports Managed IP DSLAM USER’S MANUAL Ver_A.8 4.1.1.2.5.2 State Activity Configure the LACP port state activity. (Figure 4.53) Item Description Port: Shows the port number of NVF-2400S VDSL IP DSLAM. State Activity: State Activity for LACP can either be active or passive.

  • Page 77: Lacp Status

    NVF-2400S 4 Band VDSL 24 Ports Managed IP DSLAM USER’S MANUAL Ver_A.8 4.1.1.2.5.3 LACP Status Show the LACP group status. This page is no group active. LACP don’t working. (Figure 4.54) Figure 4.54 LACP Group Status...
  • Page 78 NVF-2400S 4 Band VDSL 24 Ports Managed IP DSLAM USER’S MANUAL Ver_A.8 4.1.1.2.6 802.1X Select the “802.1x protocol”. The menu below includes the sub-menus of System, PerPort and Misc. Please configure the 802.1x(port access control protocol) items as follows. (Figure 4.55)

  • Page 79: Enable/Disable

    NVF-2400S 4 Band VDSL 24 Ports Managed IP DSLAM USER’S MANUAL Ver_A.8 4.1.1.2.6.1 802.1x Enable/Disable Default 802.1x is disabled. (Figure 4.56) Item Description 802.1x: 802.1x protocol can either be enabled or disabled. Figure 4.56 802.1x Enable/Disable...

  • Page 80: System Configuration

    NVF-2400S 4 Band VDSL 24 Ports Managed IP DSLAM USER’S MANUAL Ver_A.8 4.1.1.2.6.2 System Configuration Configure 802.1x system information. (Figure 4.57) Item Description Radius Server IP: Shows and configure the IP of your radius server. Shared Key: Shows and configure the values of your shared key.

  • Page 81: Perport Configuration

    NVF-2400S 4 Band VDSL 24 Ports Managed IP DSLAM USER’S MANUAL Ver_A.8 4.1.1.2.6.3 PerPort Configuration Configure the per port information. Default port status is No. (Figure 4.58) Item Description Port Status: Port status can be either Force Unauth=Fu, Force Auth=Fa, Auto=Au, and None=No.

  • Page 82: Misc Configuration

    NVF-2400S 4 Band VDSL 24 Ports Managed IP DSLAM USER’S MANUAL Ver_A.8 4.1.1.2.6.4 Misc Configuration Configure the 802.1x miscellaneous information. (Figure 4.59) Item Description Quiet-period: Quiet period is from 0 to 65535. Default value is 60. Tx-period: Transmit period is from 0 to 65535. Default value is 30.

  • Page 83: Status And Counters

    NVF-2400S 4 Band VDSL 24 Ports Managed IP DSLAM USER’S MANUAL Ver_A.8 4.1.1.3 Status and Counters Select the “Status and Counters”. The menu below includes the sub-menus of Port Status, Port Counters, System Information Main Menu. (Figure 4.60) Figure 4.60 Status and Counters...

  • Page 84: Port Status

    NVF-2400S 4 Band VDSL 24 Ports Managed IP DSLAM USER’S MANUAL Ver_A.8 4.1.1.3.1 Port Status Display current status of all the switch ports. (Figure 4.61) Item Description Port: Shows the port number of NVF-2400S VDSL IP DSLAM. Link Status: Shows the status of the link.

  • Page 85: Port Counters

    NVF-2400S 4 Band VDSL 24 Ports Managed IP DSLAM USER’S MANUAL Ver_A.8 4.1.1.3.2 Port Counters Display a summary of network activity. (Figure 4.62) Item Description Port: Shows the port number of NVF-2400S VDSL IP DSLAM. TxGoodPkt and RxGoodPkt: Shows the values of good packets transmitted and received.

  • Page 86: System Information

    NVF-2400S 4 Band VDSL 24 Ports Managed IP DSLAM USER’S MANUAL Ver_A.8 4.1.1.3.3 System Information Display the switch system. (Figure 4.63) Item Description MAC Address: Shows the unique MAC address of the device. Firmware version: Shows the firmware version being used by the device.

  • Page 87: Temperature & Fan Monitor

    NVF-2400S 4 Band VDSL 24 Ports Managed IP DSLAM USER’S MANUAL Ver_A.8 4.1.1.4 Temperature & Fan Monitor Display temperature is degrees Celsius(° C) and fan monitor in RPM. (Figure 4.64) Figure 4.64 Temperature & FAN Monitor...

  • Page 88: Reboot System

    NVF-2400S 4 Band VDSL 24 Ports Managed IP DSLAM USER’S MANUAL Ver_A.8 4.1.1.5 Reboot System Select the “Restart ”. The menu below includes the sub-menus of Default and Restart. (Figure 4.65) Figure 4.65 Restart Configuration...

  • Page 89: Default

    NVF-2400S 4 Band VDSL 24 Ports Managed IP DSLAM USER’S MANUAL Ver_A.8 4.1.1.5.1 Default Recovering to default. (Figure 4.66) Figure 4.66 Resetting to the default system Caution: 1. All settings will return to factory defaults. 2. After set to default system, please reboot the system.
  • Page 90 NVF-2400S 4 Band VDSL 24 Ports Managed IP DSLAM USER’S MANUAL Ver_A.8 Choose “Yes” Reset the system to default automatically. (Figure 4.67) If you choose “No”, it will go back to previous menu. Figure 4.67 Resetting to the default...

  • Page 91: Restart

    NVF-2400S 4 Band VDSL 24 Ports Managed IP DSLAM USER’S MANUAL Ver_A.8 4.1.1.5.2 Restart Restart the system. (Figure 4.68) Figure 4.68 Restart the system...

  • Page 92: Tftp Update Firmware

    NVF-2400S 4 Band VDSL 24 Ports Managed IP DSLAM USER’S MANUAL Ver_A.8 4.1.1.6 TFTP Update Firmware Select the “TFTP Update firmware Configuration ”. The menu below includes the sub-menus of TFTP Update Firmware, TFTP Restore TFTP Backup. (Figure 4.69) Figure 4.69 TFTP Update firmware Configuration...

  • Page 93: Tftp Update Firmware

    NVF-2400S 4 Band VDSL 24 Ports Managed IP DSLAM USER’S MANUAL Ver_A.8 4.1.1.6.1 TFTP Update Firmware Use TFTP to update firmware. (Figure 4.70) Item Description TFTP Server: Input the IP address of the TFTP server, it is usually the IP address of the PC with TFTP server installed.

  • Page 94: Tftp Restore Configuration

    NVF-2400S 4 Band VDSL 24 Ports Managed IP DSLAM USER’S MANUAL Ver_A.8 4.1.1.6.2 TFTP Restore Configuration Use TFTP to update new configuration file to NVF-2400S. (Figure 4.71) Item Description TFTP Server: Input the IP address of the TFTP server, it is usually the IP address of the PC with TFTP server installed.

  • Page 95: Tftp Backup Configuration

    NVF-2400S 4 Band VDSL 24 Ports Managed IP DSLAM USER’S MANUAL Ver_A.8 4.1.1.6.3 TFTP Backup Configuration Use TFTP to backup the configuration of NVF-2400S into a configuration file. (Figure 4.72) Item Description TFTP Server: Input the IP address of the TFTP server, it is usually the IP address of the PC with TFTP server installed.

  • Page 96: Logout

    NVF-2400S 4 Band VDSL 24 Ports Managed IP DSLAM USER’S MANUAL Ver_A.8 4.1.1.7 Logout Exit this user interface program. (Figure 4.73) Figure 4.73 Logout...

  • Page 97: Remote Network Management

    4.2 Remote Network Management 4.2.1 IP Setting It must assign an IP for NVF-2400S via the console port (RS-232 Port) before users configure NVF-2400S via Telnet and Web. Or users can modify the PC/Laptop’s IP domain same as the VDSL IP DSLAM and use the manufacturer default IP to configure NVF-2400S.
  • Page 98 NVF-2400S 4 Band VDSL 24 Ports Managed IP DSLAM USER’S MANUAL Ver_A.8 2. Network control by “WEB” The NVF-2400S provides WEB UI to manage the device. The default configurations are as follows: Default IP Address: 192.168.16.250 Subnet Mask: 255.255.255.0 Default Gateway: 192.168.16.1...

  • Page 99: Web Basic Management

    NVF-2400S 4 Band VDSL 24 Ports Managed IP DSLAM USER’S MANUAL Ver_A.8 4.3 Web Basic Management 4.3.1 Port Status This page can see every port status that depended on user setting and the negotiation result. (Figure 4.75) Item Description State: Display port status disable or enable.

  • Page 100: Port Statistics

    NVF-2400S 4 Band VDSL 24 Ports Managed IP DSLAM USER’S MANUAL Ver_A.8 4.3.2 Port Statistics The following information provides a view of the current status of the unit. Press “Reset” button to clean all counts. (Figure 4.76) Figure 4.76 Port Statistics...

  • Page 101: Tftp Update

    NVF-2400S 4 Band VDSL 24 Ports Managed IP DSLAM USER’S MANUAL Ver_A.8 4.3.3 TFTP Update The following menu functions allow user update the firmware and remote boot device: (Figure 4.77) 1. Install TFTP Server and execute afterwards. 2. Copy firmware update version image.bin to TFTP Server directory.

  • Page 102: Tftp Backup

    NVF-2400S 4 Band VDSL 24 Ports Managed IP DSLAM USER’S MANUAL Ver_A.8 4.3.4 TFTP Backup TFTP Restore Configuration Use this function to set TFTP server address. User can restore EEPROM value from here, but before the IP DSLAM restore the flash image file, the image file must store in TFTP server.

  • Page 103: Web Administrator Management

    NVF-2400S 4 Band VDSL 24 Ports Managed IP DSLAM USER’S MANUAL Ver_A.8 4.4 Web Administrator Management 4.4.1 IP Address 1. User can configure the IP Settings and fill the new values in here. (Figure 4.80) Figure 4.80 IP Address...

  • Page 104: Switch Settings

    NVF-2400S 4 Band VDSL 24 Ports Managed IP DSLAM USER’S MANUAL Ver_A.8 4.4.2 Switch Settings Basic: (Figure 4.81) Item Description Description: Display the name of device type. MAC Address: The unique hardware address assigned by manufacturer (default) Firmware Version: Display the device’s Firmware version.
  • Page 105 NVF-2400S 4 Band VDSL 24 Ports Managed IP DSLAM USER’S MANUAL Ver_A.8 Advanced(Miscellaneous Settings): (Figure 4.82) Item Description Mac Address Age-out Time: Setting the time for inactive MAC address remains in the Switch’s address table. Max bridge transit delay Limit the packets queuing time in IP DSLAM. If this function is enable, the packets queued bound control: exceed will be dropped.
  • Page 106 NVF-2400S 4 Band VDSL 24 Ports Managed IP DSLAM USER’S MANUAL Ver_A.8 Priority Queue Service settings(Figure 4.83) Item Description First Come First Service: The sequence of packets sent is depend on arrive order. All High before Low: The high priority packets sent before low priority packets.

  • Page 107: Port Controls

    Half: User can set backpressure is enable or disable in half mode. NVF-2400S, port 1 ~ port 24, supports by-port ingress and egress rate control. For example, assume Port 1 is 10Mbps, users can set it’s effective egress rate is 1Mbps, ingress rate is 500Kbps.

  • Page 108: Trunking

    NVF-2400S 4 Band VDSL 24 Ports Managed IP DSLAM USER’S MANUAL Ver_A.8 4.4.4 Trunking The Link Aggregation Control Protocol (LACP) provides a standardized means for exchanging information between Partner Systems on a link to allow their Link Aggregation Control instances to reach agreement on the identity of the Link Aggregation Group to which the link belongs, move the link to that Link Aggregation Group, and enable its transmission and reception functions in an orderly manner.
  • Page 109 NVF-2400S 4 Band VDSL 24 Ports Managed IP DSLAM USER’S MANUAL Ver_A.8 AGGREGATOR SETTING System Priority: A value used to identify the active LACP. The switch with the lowest value has the highest priority and is selected as the active LACP.
  • Page 110 NVF-2400S 4 Band VDSL 24 Ports Managed IP DSLAM USER’S MANUAL Ver_A.8 AGGREGATOR INFORMATION When you are setting LACP aggregator, you can see relation information in here. (Figure 4.86) 1. This page is no group active. LACP don’t working. Figure 4.86 Aggregator Information 2.
  • Page 111 NVF-2400S 4 Band VDSL 24 Ports Managed IP DSLAM USER’S MANUAL Ver_A.8 State Activity(Figure 4.88) Active (select): The port automatically sends LACP protocol packets. Passive (no select): The port does not automatically sends LACP protocol packets, and responds only if it receives LACP protocol packets from the opposite device.

  • Page 112: Filter Database

    4.89) Figure 4.89 IGMP Snooping The NVF-2400S supports IP multicast, you can enable IGMP protocol on web management’s switch setting advanced page, then display the IGMP snooping information in this page, you can view difference multicast group, VID and member port in here, IP multicast addresses range from 224.0.0.0 through 239.255.255.255.
  • Page 113 NVF-2400S 4 Band VDSL 24 Ports Managed IP DSLAM USER’S MANUAL Ver_A.8 to detect IGMP queries and report packets and manage IP multicast traffic through the switch. IGMP have three fundamental types of message as follows: Message Description A message sent from the carrier (IGMP router or switch) asking for a response from Query each host belonging to the multicast group.
  • Page 114 NVF-2400S 4 Band VDSL 24 Ports Managed IP DSLAM USER’S MANUAL Ver_A.8 Static MAC Addresses New entry of static address can be added and list can be defined to the address table. (Figure 4.90) Figure 4.90 Static MAC Addresses...
  • Page 115 NVF-2400S 4 Band VDSL 24 Ports Managed IP DSLAM USER’S MANUAL Ver_A.8 MAC filtering MAC address filtering allows the switch to drop unwanted traffic. Traffic is filtered based on the destination addresses. (Figure 4.91) Figure 4.91 MAC filtering 1. In the MAC Address box, enter the MAC address that wants to filter.

  • Page 116: Vlan Config

    NVF-2400S 4 Band VDSL 24 Ports Managed IP DSLAM USER’S MANUAL Ver_A.8 4.4.6 VLAN Config A Virtual LAN (VLAN) is a logical network grouping that limits the broadcast domain. It allows you to isolate network traffic so only members of the VLAN receive traffic from the same VLAN members.
  • Page 117 NVF-2400S 4 Band VDSL 24 Ports Managed IP DSLAM USER’S MANUAL Ver_A.8 Port-based VLAN Packets can go among only members of the same VLAN group. Note all unselected ports are treated as belonging to another single VLAN. If the port-based VLAN enabled, the VLAN-tagging is ignored.
  • Page 118 NVF-2400S 4 Band VDSL 24 Ports Managed IP DSLAM USER’S MANUAL Ver_A.8 Create a new VLAN group: 1. Click Add to create a new VLAN group. (Figure 4.94) 2. Enter the VLAN name, group ID and select the members for the new VLAN, then click Apply.
  • Page 119 NVF-2400S 4 Band VDSL 24 Ports Managed IP DSLAM USER’S MANUAL Ver_A.8 Tag-based VLAN (IEEE 802.1Q VLAN) (Figure 4.95) Tagged-based VLAN is an IEEE 802.1Q specification standard. Therefore, it is possible to create a VLAN across devices from different switch venders. IEEE 802.1Q VLAN uses a technique to insert a “tag” into the Ethernet frames.
  • Page 120 NVF-2400S 4 Band VDSL 24 Ports Managed IP DSLAM USER’S MANUAL Ver_A.8 802.1Q VLAN(Figure 4.96) This page, user can create Tag-based VLAN, and enable or disable GVRP protocol. There are 256 VLAN groups to provide configure. Enable 802.1Q VLAN, the all ports on the switch belong to default VLAN, VID is 1.
  • Page 121 GVRP allows automatic VLAN configuration between the switch and nodes. If the NVF-2400S is connected to a device with GVRP enabled, you can send a GVRP request using the VID of a VLAN defined on the NVF-2400S, the NVF-2400S will automatically add that device to the existing VLAN.
  • Page 122 NVF-2400S 4 Band VDSL 24 Ports Managed IP DSLAM USER’S MANUAL Ver_A.8 The 24-ports VDSL IP DSLAM has 16 PVID ranges. PVID of Port 1 ~ Port 26 must be in the same range. Num. PVID Range Num. PVID Range Num.

  • Page 123: Spanning Tree

    When STP enabled, to ensure that only one path at a time is active between any two nodes on the network. You can enable Spanning-Tree Protocol on web management’s switch setting advanced item, select enable Spanning-Tree protocol. We are recommended that you enable STP on all NVF-2400S to ensure a single active path on the network.
  • Page 124 NVF-2400S 4 Band VDSL 24 Ports Managed IP DSLAM USER’S MANUAL Ver_A.8 You can set new value for STP parameter(Figure 4.100) Figure 4.100 Configure STP parameters Parameter Description You can change priority value, A value used to identify the root bridge. The bridge Priority with the lowest value has the highest priority and is selected as the root.
  • Page 125 NVF-2400S 4 Band VDSL 24 Ports Managed IP DSLAM USER’S MANUAL Ver_A.8 The following parameter can be configured on each port(Figure 4.101) Figure 4.101 Configure STP port parameters Parameter Description Define the priority of each port, the rage is from 0 to 255, the lower number has Port Priority the higher priority.

  • Page 126: Port Sniffer

    NVF-2400S 4 Band VDSL 24 Ports Managed IP DSLAM USER’S MANUAL Ver_A.8 4.4.8 Port Sniffer The Port Sniffer is a method for monitor traffic in switched networks. Traffic through ports can be monitored by one specific port. That is, traffic goes in or out monitored ports will be duplicated into sniffer port.

  • Page 127: Snmp

    NVF-2400S 4 Band VDSL 24 Ports Managed IP DSLAM USER’S MANUAL Ver_A.8 4.4.9 SNMP Any Network Management running the simple Network Management Protocol (SNMP) can manage the switch, provided the Management Information Base (MIB) is installed correctly on the management station. The SNMP is a Protocol that governs the transfer of information between management and agent.
  • Page 128 NVF-2400S 4 Band VDSL 24 Ports Managed IP DSLAM USER’S MANUAL Ver_A.8 2. Community strings serve as passwords and can be entered as one of the following: Item Description Read only. Enables requests accompanied by this string to display MIB-object information.

  • Page 129: Security Manager

    NVF-2400S 4 Band VDSL 24 Ports Managed IP DSLAM USER’S MANUAL Ver_A.8 4.4.10 Security Manager Using this page, user can change web management user name and password. (Figure 4.105) Item Description User name: Type the new user name. Password: Type the new password.

  • Page 130: Config

    NVF-2400S 4 Band VDSL 24 Ports Managed IP DSLAM USER’S MANUAL Ver_A.8 4.4.11 802.1X Config System Configuration 802.1x makes using of the physical access characteristics of IEEE802 LAN infrastructures in order to provide a means of authenticating and authorizing devices attached to a LAN port that has point-to-point connection characteristics, and of preventing access to that port in cases in which the authentication and authorization process fails.
  • Page 131 NVF-2400S 4 Band VDSL 24 Ports Managed IP DSLAM USER’S MANUAL Ver_A.8 Misc Configuration In this page, you can change the default configuration for the 802.1x standard: Item Description used to define periods of time during which it will not attempt to acquire a supplicant (Default time is 60 Quiet Period: seconds).

  • Page 132: Bridge Location

    NVF-2400S 4 Band VDSL 24 Ports Managed IP DSLAM USER’S MANUAL Ver_A.8 4.4.12 Bridge Location This function allows for the identification of the location of each Remote Bridge. In the text box to a port, type the location of the Remote Bridge for that port. The field is limited to alphanumeric characters and hyphen, and will accept a maximum 10 characters.

  • Page 133: Interleave

    NVF-2400S 4 Band VDSL 24 Ports Managed IP DSLAM USER’S MANUAL Ver_A.8 4.4.13 Interleave This function is used in digital data transmission technology to protect the transmission against noise issue and data error. If during transit more than a certain amount of data has been lost then the data cannot be correctly decoded. Short bursts of noise on the line can cause these data packets to become corrupt and the bridge has to re-request data which in turn can slow down the overall rate at which data is transmitted.
  • Page 134 NVF-2400S 4 Band VDSL 24 Ports Managed IP DSLAM USER’S MANUAL Ver_A.8 If your line is particularly susceptible to bursts of noise then interleaving should improve your vdsl experience simply because if you lose a whole batch of data then this could cause your bridge to loose sync with the exchange.
  • Page 135 NVF-2400S 4 Band VDSL 24 Ports Managed IP DSLAM USER’S MANUAL Ver_A.8 The following ports can modify the desired interleave depth. (Figure 4.108) Figure 4.108 Interleave Depth The current information provides a view of the current status of the unit.

  • Page 136: Reset System

    NVF-2400S 4 Band VDSL 24 Ports Managed IP DSLAM USER’S MANUAL Ver_A.8 4.4.14 Reset System Reset NVF-2400S to default configuration. (Figure 4.110) Figure 4.110 Reset System 4.4.15 Reboot Reboot the NVF-2400S in software reset. (Figure 4.111) Figure 4.111 Reboot System...

  • Page 137: Chapter 5. Applications

    Flexible Configuration The NVF-2400S is not only designed to segment your network, but also to provide a wide range of options in the configuration of Home network connections. It can be used as a simple stand-alone IP DSLAM; or can be connected with another IP DSLAM, Cable modem, Router, XDSL, ISDN, gateway or other network interconnection devices in various configurations.
  • Page 138 NVF-2400S 4 Band VDSL 24 Ports Managed IP DSLAM USER’S MANUAL Ver_A.8 Used as Apartment for Internet Access The NVF-2400S provides a high speed, 5/15/25Mbps transmission over existing home telephone wiring over a single Internet account to provide simultaneous independent Internet access to multiple users.
  • Page 139 NVF-2400S 4 Band VDSL 24 Ports Managed IP DSLAM USER’S MANUAL Ver_A.8 Application for sharing a single internet account If multiple users would like to share a single internet account using the NVF-2400S, which is to be connected to IP sharing device then to xDSL or Cable Modem.

  • Page 140: Appendix A: Rj-21 Telco Ports Distribution

    NVF-2400S 4 Band VDSL 24 Ports Managed IP DSLAM USER’S MANUAL Ver_A.8 Appendix A: RJ-21 Telco ports distribution A.1 RJ-21 Pin and VDSL port contrast list Table A-1 VDSL 50 Pin RJ-21 Cable Connector List Cable Characteristic = 24 AWG twist wire &...
  • Page 141 NVF-2400S 4 Band VDSL 24 Ports Managed IP DSLAM USER’S MANUAL Ver_A.8 RJ-21 Cable Drawing (150 cm Male to Male, 24AWG) Figure A-1...
  • Page 142 NVF-2400S 4 Band VDSL 24 Ports Managed IP DSLAM USER’S MANUAL Ver_A.8 A.2 Serial Console Interface Connector Pin Assignments The serial console interface connector is a 9-pin, RS-232 D-type, DTE connector. A null modem cable is required to connect a workstation running the Linux or Windows operating system.

  • Page 143: Appendix B: Vdsl Spectrum

    NVF-2400S 4 Band VDSL 24 Ports Managed IP DSLAM USER’S MANUAL Ver_A.8 Appendix B: VDSL Spectrum VDSL Technology – Requirements & Definitions Spectral Allocation • Co-exists with legacy Voice and ISDN services • Co-exists with other xDSL technologies Slide 5 •...

  • Page 144: Appendix C: Product Specification

    NVF-2400S 4 Band VDSL 24 Ports Managed IP DSLAM USER’S MANUAL Ver_A.8 Appendix C: Product Specification Key Features & Benefits • Supports bandwidth management (speed rate control) 5M/15M/25Mbps for VDSL port with long driver capable up to 1.7/1.1/0.6km (5666/3666/1999 feet) •...
  • Page 145 NVF-2400S 4 Band VDSL 24 Ports Managed IP DSLAM USER’S MANUAL Ver_A.8 Product Specification IEEE802.3 standard IEEE802.3u standard Standard: IEEE802.3ab standard Compliant with ETSI, ITU, ANSI standards 2 * RJ-45 10/100/1000Mbps Ethernet port 24 * RJ-21 connector for VDSL connection...

  • Page 146: Appendix D: 4 Band Vdsl Electrical Characteristics

    NVF-2400S 4 Band VDSL 24 Ports Managed IP DSLAM USER’S MANUAL Ver_A.8 Appendix D: 4 Band VDSL Electrical Characteristics Parameter Min. Typ. Max. Unit Spectrum Transmit Receive PSD Level Transmit -61.5 dBm/Hz Receive dBm/Hz Noise Margin 5Mbps Link Margin Transmit...

  • Page 147: Appendix E: Example Of Vlan Setting

    NVF-2400S 4 Band VDSL 24 Ports Managed IP DSLAM USER’S MANUAL Ver_A.8 Appendix E: Example of VLAN Setting Example 1: 4 users join to Internet by VDSL system like following drawing, and have 7 demands. (Figure E-1) User A connects to port 1 and join to Internet through port 26...
  • Page 148 NVF-2400S 4 Band VDSL 24 Ports Managed IP DSLAM USER’S MANUAL Ver_A.8 Add VLAN Group: (Figure E-3) There are 256 VLAN groups available for configuration. Add a VLAN Group VID=21 member ports = port 1 & port 26 Note: Do not change the default_1 group.
  • Page 149 NVF-2400S 4 Band VDSL 24 Ports Managed IP DSLAM USER’S MANUAL Ver_A.8 Setup VLAN Name=UserA, VID=21, select member ports 1 & 26 (Figure E-4) Figure E.4 Select and add VLAN member ports...
  • Page 150 NVF-2400S 4 Band VDSL 24 Ports Managed IP DSLAM USER’S MANUAL Ver_A.8 Select Untag or Tag Setup. Unless the device (computer or switch) which connect to port 1 or port 26 can support Tagging VLAN, otherwise select Untag. (Figure E-5) Figure E.5 Select Tag / Untag...
  • Page 151 NVF-2400S 4 Band VDSL 24 Ports Managed IP DSLAM USER’S MANUAL Ver_A.8 Example 2: 4 users join to Internet through 2 IP DSLAMs like the following drawing, and have 7 demands. (Figure E-6) User A connect to port 1 of VDSL-1 and join to Internet through port 26 of VDSL-2...
  • Page 152 NVF-2400S 4 Band VDSL 24 Ports Managed IP DSLAM USER’S MANUAL Ver_A.8 Setup Procedure: VDSL-1 SETUP: a. Setup Port VID: Port 1 PVID=11, Port 2 PVID=12 b. Add VLAN Group: Note: Do not change the default_1 group. Add a VLAN Group, Group name=UserA VID=11 member ports = port 1 & port 26...
  • Page 153 NVF-2400S 4 Band VDSL 24 Ports Managed IP DSLAM USER’S MANUAL Ver_A.8 VDSL-2 SETUP: a. Setup Port VID: Port 1 PVID=21, Port 2 PVID=12 b. Add VLAN Group: Caution: Do not change the default_1 group. Add a VLAN Group, Group name=UserA VID=11 member ports = port 25 & port 26...
  • Page 154 NVF-2400S 4 Band VDSL 24 Ports Managed IP DSLAM USER’S MANUAL Ver_A.8 Add a VLAN Group, Group name=UserC VID=21 member ports = port 1 & port 26 Select Untag or Tag Setup for VID=21 group: Port Number Untag/Tag Select Untag...

  • Page 155: Appendix F: Troubleshooting

    NVF-2400S 4 Band VDSL 24 Ports Managed IP DSLAM USER’S MANUAL Ver_A.8 Appendix F: Troubleshooting Diagnosing VDSL Indicators The VDSL can be easily monitored through its comprehensive panel indicators. These indicators assist the network manager in identifying problems of the IP DSLAM may encounter. This section describes common problems you may encounter and possible solutions.
  • Page 156 Please make sure that the phone wire must be connected between NVF-2400S and NVF-200R when both are power on. NVF-2400S will do link speed function depending on speed mode setting and phone wire length, therefore if NVF-2400S can’t detect NVF-200R over phone wire Solution: while both power on, this will cause the link to fail.
  • Page 157 NVF-2400S 4 Band VDSL 24 Ports Managed IP DSLAM USER’S MANUAL Ver_A.8 5. Symptom: We tested with a regular S0 bus from an NTBA - data works, but ISDN telephone does not. You must connect according to the following chart if you want to connect CO and CPE with NTBA.
  • Page 158 NVF-2400S 4 Band VDSL 24 Ports Managed IP DSLAM USER’S MANUAL Ver_A.8 System Diagnostics Power and Cooling Problems If the POWER indicator does not turn on when the power cord is plugged in, you may have a problem with the power outlet, power cord, or internal power supply as explained in the previous section.
  • Page 159 2. Make sure all devices are connected to the network. Equipment any have been unintentionally disconnected from the network. 3. When cascading two devices using RJ-45 station ports at both ends of the cable (NVF-2400S) supports auto MDIX), without crossover cable can be used.

  • Page 160: Appendix G: Compliance And Safety Information

    NVF-2400S 4 Band VDSL 24 Ports Managed IP DSLAM USER’S MANUAL Ver_A.8 Appendix G: Compliance and Safety Information FCC Radio Frequency Interference Statement This equipment has been tested and found to comply with the limits for a computing device, pursuant to Part 15 of FCC rules.
  • Page 161 NVF-2400S 4 Band VDSL 24 Ports Managed IP DSLAM USER’S MANUAL Ver_A.8 proper functioning of your equipment. If they do, you will be notified in advance in order for you to make necessary modifications to maintain uninterrupted service. This equipment may not be used on coin service provided by the telephone company. Connection to party lines is subject to state tariffs.
  • Page 162 NVF-2400S 4 Band VDSL 24 Ports Managed IP DSLAM USER’S MANUAL Ver_A.8 FCC Warning This equipment has been tested to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment.

  • Page 163: Warranty

    NVF-2400S 4 Band VDSL 24 Ports Managed IP DSLAM USER’S MANUAL Ver_A.8 Warranty The original owner that the product delivered in this package will be free from defects in material and workmanship for one year parts after purchase. There will be a minimal charge to replace consumable components, such as fuses, power transformers, and mechanical cooling devices.
  • Page 164 NVF-2400S 4 Band VDSL 24 Ports Managed IP DSLAM USER’S MANUAL Ver_A.8 Chinese SJ/T 11364-2006 有 毒 有 害 物 质 或 元 素 部件名称 铅(Pb) 汞(Hg) 镉(Cd) 六价铬[Cr(VI)] 多溴联苯(PBB) 多溴二苯醚(PBDE) 结构壳体 ○ ○ ○ ○ ○ ○ 电路组 ○...

Table of Contents