Panasonic Toughbook CF-50 Series Manual page 46

Wireless LAN
The Settings
To use the wireless LAN, set the profile using the following procedure.
The settings will vary for different network environments depending on the network
system being used. For more details, ask your system administrator or the person in
charge of the network.
CAUTION
Set profiles for each user by following the procedure shown below.
NOTE
Windows 2000
After setting the profile, delete the profile displayed at the time of purchase (profile
name: Default).
Windows XP
If [Windows XP is currently configured to manage the Intel(R) PRO/Wireless LAN
adaptor.] is displayed, select [Yes].
1
Double-click
2
Select your wireless LAN adapter and select [General]
3
Select [On] for [Switch radio]
4
Select [Networks] and select [Add]
5
Enter the profile name and network name, and then make other
necessary changes, then select [Next]
6
Make necessary changes and select [Finish]
7
Select [OK]
NOTE
About WLAN Security Client
WLAN Security Client is an implementation of the client side of the IEEE 802.1X-Port
Based Network Access Control protocol. 802.1X access control provides improved
security for both wired and wireless networks.
• Since the WLAN Security Client has already started when
the taskbar, do not double-start it. If
Security Client in the following menu.
Windows 2000
Select [Start] - [Programs] - [Intel] - [WLAN Security Client Manager].
Windows XP
Select [start] - [All Programs] - [Intel] - [WLAN Security Client Manager].
• For more information about how to use the WLAN Security Client, refer to the
[Help] in the menu bar or;
Windows 2000
Select [Getting Started Guide] or [User's Guide] in [Star t] - [Programs] - [Intel].
Windows XP
Select [Getting Started Guide] or [User's Guide] in [start] - [All Programs] - [Intel].
on the taskbar
is not displayed, start up the WLAN
46
is displayed on