Express Timer Programing; To Use The Vcr While It Is In Timer Recording Standby Mode; Checking, Canceling Or Changing Program Settings; Timer Recording - JVC HR-S8009UM Instructions Manual

– Timer Recording –

Timer Recording

Up to 8 timer recording programs can be made using Express
timer programing method as far as a year in advance. Remember,
the clock must be set before you can program the timer.
NOTES:
If all the 8 programs have already been set, "PROGRAM FULL"
appears on the TV screen.
After timer recording is completed, the VCR turns off
automatically.
You can program the timer recording while a regular recording
is in progress; the menu screens will not be recorded.
To timer-record cable channels, be sure to keep the cable box
turned on with the correct channel selected.
In case of a power failure after programming, the VCR's memory
backup keeps your selections (if the lithium battery is not
exhausted).
If the tape reaches its end during timer recording, the recording
stops and " ", " " and " $" on the display panel blink. Press
#
to disengage timer, then press STOP/EJECT (0) on the
#
VCR to eject the cassette or press POWER 1 then press REW
(3) to rewind the tape.

Express Timer Programing

Load a cassette with the record safety tab intact. The VCR turns
on, and the counter is reset, automatically.
A
Press PROG on the Remote to access the Program screen.
B
Press START+/–, STOP+/–, DATE+/–
or PR+/– repeatedly to enter the start
time, stop time, date or channel.
Press and hold START+/– or
STOP+/– to increase the time in
30-minute intervals.
To set the tape speed, press SP/EP
( ).
p
To timer-record daily (Monday–Friday) or weekly serials,
press DAILY (M-F) (Number key "8") or WEEKLY (Number
key "9"). Pressing the button again makes the "DAILY" or
"WEEKLY" display disappear.
C
Press OK or PROG.
If "PROGRAM NOT COMPLETED PROGRAM OVERLAP"
appears, see "Program overlap warning display" (
D
Press #. The VCR turns off automatically and "
on the display panel.
PROGRAM 1
START STOP
– –:– –AM – –:– –AM
DATE CH
– –/– –/– – – – – SP
PRESS (+/–, SP/EP, 8=DAILY
9=WEEKLY), THEN (0K)
PRESS (PROG.) TO END
pg. 11).
" is displayed
#
— 10 —
To use the VCR while it is in timer
recording standby mode
Press #, then press 1. After you use the VCR, press # again to
put the VCR into timer recording standby mode.
Checking, canceling or changing
program settings
A
Disengage timer
Press #, then press 1.
When "AUTO TIMER" (
have to press #.
B
Access Program Check screen
Press " (CHECK).
C
Access Program screen
Press " (CHECK) again. Each time you
press " (CHECK), the next program's
Program screen appears.
D
Cancel or change program setting
To cancel a program, press & (CANCEL) when the Program
screen you do not want is shown.
To change a program, press the appropriate button: START+/–,
STOP+/–, DATE+/–, PR+/–, DAILY (M-F) (Number key "8"),
WEEKLY (Number key "9") and/or SP/EP (
screen on which you want to make changes is shown.
E
Return to normal screen
Press " (CHECK) repeatedly until no Program screen is shown.
F
Reengage timer recording standby mode
Press #. The VCR turns off automatically and "
the display panel.
When "AUTO TIMER" (
recording standby mode automatically resumes when you turn
off the VCR.
pg. 12) is set to "ON", you do not
PR START STOP CH
1 8:00P 10:00 12
2 10:00A 10:45 40
3 11:30P 1:00 125
4
5
6
7
8
PRESS (CHECK) TO NEXT
PROGRAM 1
START STOP
8:00 PM 10:00 PM
DATE CH
12/24/02 12 SP
PRESS (CANCEL) TO CANCEL
PRESS (CHECK) TO NEXT
) when the Program
p
" is displayed on
#
pg. 12) is set to "ON", the timer
DATE
12/24
12/25
12/25