Advertisement
o
If the mobile device requests for a passkey, type 0000.
o
The mobile device will confirm the pairing and may also ask to connect to the
Bluetooth™ headset. Select Yes or Ok.
• Answering a call. Press the Multifunction Button.
• Rejecting a call. Press and hold the multifunction button for 2 seconds.
• Ending a call. Press the Multifunction button until voice prompt "Call Terminated
Phone One/Two".
• Volume up/down. Press Vol+ to increase and Vol- to decrease.
• Transferring the call to the mobile device. During a call, press and hold the
Multifunction Button for 2 seconds to transfer the sound to phone and vice-versa
7. Multipoint Pairing
• For Slim, follow the new pairing instruction to pair a mobile device 1. After mobile
device 1 is paired and connected successfully, power Off the Slim.
• Then power On again and hold down the Multifunction button for 5 seconds to enter
pairing mode once again.
• Once Slim is on pairing mode once again, you may pair and connect the mobile
device 2.
• Now that the mobile device 2 is paired and connected, the mobile device 1 needs to
be reconnected. Go to Bluetooth™ menu of mobile device 1 and select connect to
Slim.
• Check the connection status of mobile device 1 and 2 and make sure it is connected
with Slim
8. Multipoint Operation
• Incoming call from mobile device 2.
o
Short press the Multifunction button to hold the active call and accept the
incoming call.
o
Press and hold the Multifunction button for 2 seconds to end active call and accept
the incoming call.
o
Double press the Multifunction button to keep active call and reject the incoming
call.
• Whilst on Call hold status.
o
Short press the Multifunction button to swap active call from mobile device 1 to
mobile device 2.
o
Press and hold the Multifunction button for 2 seconds to end mobile device 1 .
3
Advertisement
