Advertisement
active call and accept held call from mobile device 2.
o
Double press the Multifunction button to hold call on mobile device 1 and release
the call of mobile device 2
9. Charging Bluetooth™ Headset
• The Slim voice prompt function will inform the user if the battery status is low. At
that point, the headset needs to be charged.
• Use the USB charger included on the package to charge the Bluetooth™ headset on a
PC or any USB chargeable port.
• While charging, the LED indicator remains red, when the charging is complete, LED lit
up in blue.
10. Precautions
Please read this User Guide carefully before using the product.
The contents herein may be changed to deliver the better services to the end-user. To
keep the perfect performances of the product, never use it in cold, hot, dusty or
moistened areas or places, especially in the following conditions:
1.Moist or underwater conditions.
2.Conditions near the heater or high-temperature service.
3.Conditions with direct sunshine.
4.Conditions with apt falling.
5.Never dismantle this product without due permission, otherwise it may nullify the
warranty clauses.
11. Trouble Shooting
If you are unable to connect Slim to your phone please try the following:
• Check if the battery is low. When the battery is low, the pairing takes longer. Then,
you should charge the battery.
• Check the power switch, make sure it is on.
• Restart the Bluetooth™ switch, make sure your phone can find Slim.
• Ensure the password for pairing is correct, if it was needed.
4
Advertisement
