Manual Tracking - JVC HR-J648EH, HR-J648E, HR-J448E, HR-J248E Instructions Manual

14
EN
1
4
7
/
2
1
REW
¶
1
3
¢
q
REVIEW
¡
2 3
REVIEW
5 6
8
9
0
4
TV PROG.
3 ¡
FF
7 8
PAUSE
4 ¢
PUSH JOG

Manual Tracking

Your video recorder is equipped with automatic tracking
control. During playback, you can override this and adjust the
tracking manually by pressing the TV PROG. buttons.
¢
1
OVERRIDE AUTOMATIC
TRACKING
1
Press SP/LP (
tracking.
ADJUST TRACKING
MANUALLY
2
Press TV PROG. + or – to adjust tracking.
RETURN TO AUTOMATIC
TRACKING
3
Press SP/LP (
matic tracking.
NOTE:
When a new tape is inserted, the recorder enters the automatic
tracking mode automatically.
NTSC Playback
Your video recorder is equipped with NTSC circuitry that can
play back NTSC tapes.
LOAD A CASSETTE
1
Insert a cassette recorded in NTSC.
START PLAYBACK
2
Press PLAY.
"NTSC" appears on the screen for about 5 seconds.
Some TVs shrink the picture vertically and place
black bars at the top and bottom of the screen. This is
not a malfunction on the part of either the video
recorder or the TV.
The picture may roll up and down. This can be
corrected using the V-HOLD control found on some
TVs. (This cannot be corrected if the TV does not
have a V-HOLD control.)
The counter and tape remaining time readings will be
incorrect.
During search, still, or frame-by-frame playback, the
picture will be distorted, and there may be a loss of
colour.
Depending on the type of TV, the top and bottom
portions of superimposed displays may be cut off
during NTSC playback.
PLAYBACK (cont.)
) on the remote to engage manual
) on the remote to re-engage auto-