Recording Basic Recording - JVC HR-J648EH, HR-J648E, HR-J448E, HR-J248E Instructions Manual

RECORDING
Basic
Recording
Turn on the TV and select the VIDEO channel (or AV mode).
1
4
NUMBER
7
/
2
1
¶
RECORD
1
3
¢
q
¡
SP/LP
2 3
5 6
8 9
0
4
TV PROG.
3 ¡
PLAY
7 8
PAUSE
4 ¢
TV signals being received by the recorder's built-in tuner can be
recorded onto a video tape. You can "capture" a TV programme
using your video recorder.
LOAD A CASSETTE
1
Insert a cassette with the record safety tab intact.
The counter is reset to 0:00:00 and the recorder
power comes on automatically.
CHOOSE A PROGRAMME
2
Press TV PROG. +/– or the NUMBER keys to select the
channel you wish to record.
SET TAPE SPEED (HR-J648E/
J648EH/J448E ONLY)
¢ 3
Press SP/LP (
recorder display panel to confirm the selected tape
1
speed.
START RECORDING
4
Press and hold RECORD and PLAY on the remote
control, or press RECORD on the recorder.
With HR-J648E/J648EH/J448E:
B.E.S.T. takes place at the beginning of both the
first SP and the first LP recording after inserting the
cassette (
With HR-J248E:
B.E.S.T. takes place at the beginning of the first
recording after inserting the cassette (
PAUSE/RESUME
RECORDING
5
Press PAUSE. Press PLAY to resume recording.
STOP RECORDING
6
Press STOP on the remote control or STOP/EJECT on
the recorder. Then press STOP/EJECT to remove the
cassette.
Accidental erasure prevention
To prevent accidental recording on a recorded cassette,
remove its safety tab. To record on it later, cover the hole
with adhesive tape.
). Check the SP/LP indicator on the
pg. 18).
Record safety tab
17
EN
pg. 18).