Elapsed Recording Time - JVC HR-J638E/EH Instructions Manual

2
1 2
4 5
7 8
0
C.RESET
Record One Programme
While Watching Another
If your recorder is connected to the TV via AV connection, . . .
. . . press TV/VIDEO. The recorder's VIDEO indicator and the
TV broadcast being recorded disappear.
6
q
1
3

Elapsed Recording Time

6
Indication
9
You can check the exact time of a recording.
TV PROG.
1
2
Instant Timer Recording (ITR)
This easy method lets you record for from 30 minutes to 6 hours
(selectable in 30-min. increments), and shuts the recorder off
after recording is finished.
1
2
3
NOTE:
You can only perform ITR using the RECORD button on the
recorder's front panel.
SELECT CHANNEL TO
WATCH
Once recording is in progress, all you need to do is to
set the channel controls on the TV for the station you
wish to view.
The programme selected with the TV's channel
controls appears on the TV screen while the one
selected with the TV PROG. button is recorded on
the tape.
If a decoder is connected to the recorder (
you can select a scrambled channel as well with the
TV channel controls.
SET COUNTER DISPLAY
Press DISPLAY until a counter reading appears on the
dispay panel.
RESET COUNTER
Press C. RESET before starting recording or playback.
The counter is reset to "0:00:00" and shows the exact
elapsed time as the tape runs.
START RECORDING
Press RECORD on the recorder.
ENGAGE ITR MODE
Press RECORD again. ITR blinks and 0:30 appears on
the front display panel.
SET RECORDING DURATION
If you want to record for more than 30 minutes, press
RECORD to extend the time. Each press extends
recording time by 30 minutes.
19
EN
pg. 4),