Disassembly Of The Xm Module; Disassembly Of The Main; Disassembly Of The Ac-Inlet, Power & Sub Power P.c.b - Panasonic SA-HT441WP Service Manual

SA-HT441WP
Step 2 Remove 3 screws. (Panel Angle)
Step 3 Remove the panel angle.
· Disassembly of the FL & Head Phone P.C.B.
Step 4 Remove 4 screws. (FL P.C.B.)
Step 5 Remove 3 screws. (Head Phone P.C.B.)
Step 6 Remove the FL & Head phone P.C.B.

10.9. Disassembly of the XM Module

P.C.B.
· Follow (Step 1) to (Step 2) of Item 10.3.
· Follow (Step 1) to (Step 3) of Item 10.5.
· Follow (Step 1) to (Step 4) of Item 10.6.
· Follow (Step 1) to (Step 4) of Item 10.7.
· Disassembly of the XM Module P.C.B.
Step 1 Detach the FFC cable from connector (CN2015).
Step 2 Release the claws.
Step 3 Press the XM angle in the direction of arrow to remove
the XM Module P.C.B.

10.10. Disassembly of the Main

P.C.B.
· Follow (Step 1) to (Step 2) of Item 10.3.
· Follow (Step 1) to (Step 7) of Item 10.4.
· Follow (Step 1) to (Step 3) of Item 10.5.
· Follow (Step 1) of Item 10.6.
· Follow (Step 1) to (Step 4) of Item 10.7.
· Disassembly of the Main P.C.B.
Step 1 Remove 3 screws and mecha holder A & B.
Step 2 Detach the FFC cables from connectors (CN2011,
CN5701, CN5708 & CN2015).
Step 3 Remove the shield plate.
Step 4 Remove the Main P.C.B.
10.11. Disassembly of the AC-Inlet,
Power & Sub Power P.C.B
· Follow (Step 1) to (Step 2) of Item 10.3.
· Follow (Step 1) to (Step 7) of Item 10.4.
· Follow (Step 1) to (Step 3) of Item 10.5.
· Follow (Step 3) to (Step 5) of Item 10.6.
· Follow (Step 1) to (Step 4) of Item 10.7.
38