Disassembly Of Dvd Module; Disassembly Of Main - Panasonic SA-PT550E Service Manual

Caution : Do not use strong or excessive force to avoid
damage to FFC cables.

10.13. Disassembly of DVD Module

P.C.B.
· Follow (Step 1) to (Step 3) of Item 10.3.
· Follow (Step 1) to (Step 4) of Item 10.4.
· Follow (Step 1) to (Step 3) of Item 10.9.
· Follow (Step 1) to (Step 3) of Item 10.11.
· Disassembly of Mecha Chassis
Step 1 Release the claws of the mecha chassis in the direction
of arrows at the bottom chassis.
Step 2 Remove the mecha chassis.
· Disassembly of DVD Module P.C.B.
Step 3 Detach the USB shield wire from the connector
(FP9002) on USB P.C.B.
Step 4 Release the claws of two mini clamps on the bottom
chassis in the direction of arrows.
Step 5 Remove the USB shield wire from the mini clamps.
Step 6 Detach FFC cable from the connectors (CN2001 &
CN2010) on Main P.C.B.
Step 7 Remove 1 screw from DVD Module P.C.B.
Step 8 Remove 2 screws from the rear panel.
Step 9 Release the tab of rear panel in the direction of arrow.
Step 10 Remove DVD Module P.C.B.
Caution : Do not use strong or excessive force to avoid
damage to FFC cables.
10.14. Disassembly of Main P.C.B.
· Follow (Step 1) to (Step 3) of Item 10.3.
Step 1 Detach FFC cable from the connectors (CN2001,
CN2007, CN2008, CN2009, CN2010 & CN2020) on Main
P.C.B., (CS901) on Tray Loading P.C.B. and (CN5802) on
SMPS P.C.B.
Step 2 Remove the wire clamper to move aside the FFC cable
(REXX0559, SMPS to D-Amp) in the direction of arrow.
45
SA-PT550E / SA-PT550EB / SA-PT550EG