Table of Contents
Advertisement
1
1
2
2
4
4
5
5
7
7
8
8
0
0
EXAMPLE
If you program the VCR to timer
record a show on September 6
on channel 40 from 12:00 noon
to 1:00 PM in SP mode, the
screen will look like this:
6
q
3
3
6
6
9
9
TIMER
MENU
PUSH JOG
PROGRAM 1
DATE
9/ 6 FRI
START
12:00 PM
STOP
1:00 PM
CHANNEL
40 SP
PRESS NUMBER KEY(0-9)
OR (5,∞), THEN (OK)
PRESS (MENU) TO END
MAKE CORRECTIONS
6
To change any of the settings, press OK or PUSH JOG
™ £ until the item you want to change begins
blinking. Then set as in step 5.
RETURN TO NORMAL
SCREEN
7
Press MENU as many times as necessary.
Press just once to access the Auto Timer screen
(
pg. 34).
ENGAGE TIMER MODE
8
Press TIMER. The VCR turns off automatically.
NOTES:
To disengage the timer before recording starts, press TIMER
again. Pressing once more re-engages it.
In case of a power failure after programming, the VCR's
memory backup keeps your selections for 18 hours.
Backup time becomes shorter as the unit's internal parts
become old. When this occurs, please consult your nearby
JVC dealer.
If you select "PROGRAM SET" without having set the date and
time, an error message appears. Follow its instructions.
If you enter a start time that has already passed, "ERROR"
appears on the screen and flashes.
Programs that start after midnight must have the next day's date.
After timer recording is completed, the VCR's power goes off
automatically.
You can program the timer while a regular recording is in
progress; the on-screen menu will not be recorded.
If the end of tape is reached during timer recording, the
cassette is automatically ejected.
31
Advertisement
Table of Contents
