Finishing Up - Fujitsu Siemens Computers D1691 Technical Manual

Chapter 3: Board Installation

3.11 - Finishing Up

Congratulations on making it this far! You're finished setting up the hardware aspect of your
computer. Before closing up your chassis, make sure that all cables and wires are connected
properly, especially IDE cables and most importantly, jumpers. You may have difficulty powering on
your system if the motherboard jumpers are not set correctly.
In the rare circumstance that you have experienced difficulty, you can find help by asking your
vendor for assistance. If they are not available for assistance, please find setup information and
documentation online at our website or by calling your vendor's support line.
28 A26361-D1691-Z120-1-7619, Edition 1