Table of Contents
Advertisement
48
Edit To Or
From Another
Video
Recorder
2
1
2
3
4
5
6
9
7
8
0
4
CHAINE
You can use your video recorder as the source player or the
recording deck.
MAKE CONNECTIONS
1
Connect the player's 21-pin SCART connector to the
recorder's 21-pin SCART connector as shown in the
illustration on page 49.
When Using Your Video Recorder As The Source
Player . . .
. . . connect its AV1 ENTREE/SORTIE connector to the
recording deck.
When Using Your Video Recorder As The Recording
Deck . . .
.
. . . connect its AV2 ENTREE/DECODEUR connector to
the source player.
Set "SELECTION AV2" to "AUX" (
SET RECORDING DECK'S
INPUT MODE
2
Set to AUX. With this video recorder, press NUMBER
key "0" and/or CHAINE to select "AU-2" for the AV2
ENTREE/DECODEUR connector.
START SOURCE PLAYER
3
Engage its Play mode.
START RECORDING DECK
4
Engage its Record mode.
NOTE:
All necessary cables can be obtained from your dealer.
IMPORTANT
Before you start editing, be sure to select the appropriate colour
system by pressing SYSTEME COULEUR depending on the
system of the connected recorder or camcorder.
EDITING
pg. 49).
pg. 51
Advertisement
Table of Contents
