Table of Contents
Advertisement
RECORDING
Basic
Recording
Turn on the TV and select the AV mode.
1
4
7
q
VN/LD
2
2
3
5
6
8
9
0
4
CHAINE
TV signals being received by the recorder's built-in tuner can be
recorded onto a video tape. You can "capture" a TV programme
using your video recorder.
LOAD A CASSETTE
1
Insert a cassette with the record safety tab intact.
The counter is reset to 0:00:00 and the recorder
power comes on automatically.
CHOOSE A PROGRAMME
2
Press CHAINE +/– or the NUMBER keys to select the
preset you wish to record.
The CHAINE dial can also be used to select a preset.
SET TAPE SPEED
3
Press
(VN/LD). Check the VN/LD indicator on the
recorder display panel to confirm the selected tape speed.
START RECORDING
4
Press and hold q and 4 on the remote control, or
press q on the recorder.
B.E.S.T. takes place at the beginning of both the
first VN and the first LD recording after inserting
the cassette (
PAUSE/RESUME
RECORDING
5
Press 6. Press 4($) to resume recording.
STOP RECORDING
6
Press 5 on the remote control or 5/8 on the recorder.
Then press 5/8 to remove the cassette.
Accidental erasure prevention
To prevent accidental recording on a recorded cassette,
remove its safety tab. To record on it later, cover the hole
with adhesive tape.
pg. 36).
Record safety tab
35
Advertisement
Table of Contents
