Editing; Edit To Or From Another Video Recorder - JVC HR-J441MS Instructions Manual

22
EN
Edit To Or
From Another
Video
Recorder
1
4
7
/
NUMBER "0"
2
1
¶
1
3
TV Receiver
VIDEO
CHANNEL
RF Cable (provided)
2 3
5 6
8
9
0
4
TV PROG
3 ¡
7 8
4 ¢
Player Your recorder
AV Cable
(not provided)
Another recorder
Recorder
You can use your video recorder as the source player or the
recording deck.
MAKE CONNECTIONS
1
Connect the player's AUDIO/VIDEO OUT connector to
the recorder's AUDIO/VIDEO IN connector.
SET RECORDING DECK'S
INPUT MODE
2
Set to AUX. With this video recorder, press NUMBER
Key "0" or TV PROG. "AU" will appear instead of a
channel number.
START SOURCE PLAYER
3
Engage its Play mode.
START RECORDING DECK
4
Engage its Record mode.
NOTES:
All necessary cables can be obtained from your dealer.
NTSC tapes being played back in the NTSC [ PAL mode (
p. 25) cannot be dubbed to another recorder.
When you dub an NTSC tape using your recorder as the
playback deck, select NTSC 3.58 (or NTSC 4.43) with the
COLOUR SYSTEM button. (
IMPORTANT:
To edit, both the player and the recorder must be of the
same colour system. Press your recorder's COLOUR
SYSTEM button to select the appropriate colour system.
For more information on multi-system compatibility,
pg. 24.
Recorder Your recorder
AV Cable
(not provided)
Another recorder
Player

EDITING

p. 24)
TV Receiver
VIDEO
CHANNEL
RF Cable
(provided)