Security - Inmarsat Hughes 9202 User Manual

Security

You can configure three separate security settings on this page:
1) SIM PIN, 2) Phone to SIM PIN, and 3) Administration
Password.
SIM PIN – this is a four digit field that can be Enabled and
configured by the user to secure the terminal against unwanted
use. Once enabled, the terminal will require the SIM PIN at
startup.
Phone to SIM PIN – use up to 5 digits to lock the terminal to
the current SIM card. The Phone to SIM PIN code will have to
be entered any time the SIM card is changed. This setting is
similar to your GSM phone's security code. Default password is
12345.
Administration Password – this configuration allows the user
to prevent terminal settings from being changed once the
terminal is configured properly. This password will have to be
entered before any settings can be changed. See screenshot
below.

Using the Web UI
45
3004149-0001 Revision B