Table of Contents
Advertisement
Status messages
Display
HUGHES 9202
Powering Off
Too Hot
Battery Hot
SIM Error
No SIM
SIM Blocked
Enter PIN
# tries left
Fault {code/text}
{quick text}
Pointing
Registering
GPS Old
Ready
Standard
Stream {rate}K
Conn Fail:
{code/text}
Using the LCD and Keypad
14
3004149-0001 Revision B
The upper level of the LCD is used for status messages and
menu items. Status messages are listed below.
On screen during power up
Displayed while the 9202 is powering down
Unit is too hot; if not corrected, a temporary thermal shutdown may occur
Battery is too hot; reduce temperature or turn off unit to avoid damage to the battery
SIM communication error
No SIM is detected in the UT
The SIM is blocked due to too many SIM PIN attempts. Enter the PUK via the Web
UI or LaunchPad to clear
A SIM PIN code is needed (this can be entered via the front panel buttons)
# of SIM PIN attempts left before the SIM is blocked
A hardware fault exists preventing normal operation. Scrollable text is displayed.
Use the right button to view the scrollable text.
Special messages displayed for ~15 seconds or until the next button press, see
Table 3 for the list of possible messages.
In pointing mode, this message alternates with satellite bearing and elevation on a 3
second cycle
Displayed during the registration process
GPS is too old, obtain a fresh GPS location
Registration was successful and the unit is PS attached
Standard (best effort) PDP context is active
Streaming PDP context is active. Streaming rate is listed: {rate} = 32/64/128
A problem occurred during context activation. Scrollable text is displayed. Use the
right (scroll) button to view the scrollable text for more information. Press the left
(user) button to clear the message.
This can be caused by service subscription problems, using the wrong APN or
invalid APN username/password. Check the APN and username/password on the
Web UI. Failing that, contact your service provider to check the subscription.
Table 1: Status Messages
Examples:
Description
Advertisement
Table of Contents
