Manage Contexts - Inmarsat Hughes 9202 User Manual

Manage Contexts

The Manage Contexts page under the Connections icon allows
the user to setup and configure PDP contexts (data connections)
for any TE that is connected to the UT. It also shows you all
current Active Connections.
Open a New Connection field - To open a new connection,
select the row and enter the required data:
Owner – Your current IP address is shown by default (.101), but
you can change it to control connections for any other device
connected to the terminal. The page automatically displays
entries for all detected devices and these entries can be selected
to activate connections for those devices.
Service - Select the service that you want by clicking on the
down arrow. The drop down list shows all of the different QoS
types: Standard, Streaming 32K, Streaming 64K, and Streaming
128K. Select the appropriate service required.

Using the Web UI
25
3004149-0001 Revision B