Superimpose - JVC HR-J4006UM Instructions Manual

18
EN
OSD
••
MENU
3
OK
To recall an indication
1
Press OSD.
All indications corresponding to the current status are
displayed for 5 seconds. After that, the counter
information and RECORD/PAUSE if in the Record
Pause mode, are left displayed on the screen.
2
Press OSD again to clear the display.
The RECORD/PAUSE indication is left displayed on
the screen.
The superimposed indication on the TV screen tells you what the VCR is doing.
Tuned-in channel or AUX(iliary) mode
When the channel is changed, the new
channel is displayed on the screen for 5
Tape position indicator
PLAYBACK AND RECORDING FEATURES (cont.)
1
1 2 3
2
4 5 6
7 8 9
0
4
CH
••
PUSH JOG
seconds.
Clock time

Superimpose

This function, switchable between ON and OFF, determines
whether or not operational indicators will appear on screen.
ACCESS MAIN MENU
SCREEN
1
Press MENU.
ACCESS FUNCTION SET
SCREEN
2
Move the highlight bar (arrow) to "FUNCTION SET" by
pressing CH5∞ or PUSH JOG%fi, then press OK or
PUSH JOG
SELECT SUPERIMPOSE SET
MODE
3
Move the highlight bar
(arrow) to "SUPERIMPOSE"
by pressing CH5∞ or
PUSH JOG%fi, then press
OK or PUSH JOG
select the desired mode:
a– Select "ON" if you want
the superimposed
operational indications
on the TV screen.
b– Select "OFF" if you do not want the superimposed
operational indications on the screen.
RETURN TO NORMAL
SCREEN
4
Press MENU.
NOTES:
If you engage the Record Pause mode, RECORD/PAUSE is
displayed regardless of the Superimpose mode setting.
If you select a channel on which no signal is received, the
channel number is displayed regardless of the Superimpose
mode setting.
Each time you press OSD , the indication on the front display
panel will also change as follows: counter reading = channel
number = clock time. (Channel number is not displayed
during playback.)
CH 125 RECORD
THU 12:00 AM PAUSE
] SP
+ + +
B E
INDEX-1
COUNT –1:23:45
Counter reading
.
FUNCTION
B.E.S.T.
PICTURE CONTROL
AUTO TIMER
=SUPERIMPOSE
to
AUTO SP = EP TIMER
VIDEO STABILIZER
SELECT WITH (5,∞) AND (OK)
PRESS (MENU) TO END
Operation mode
When the operation mode is changed,
the new mode is displayed — RECORD
(5 sec.), PLAY (5 sec.), FF/REW (5 sec.
when engaged from Stop mode),
RECORD/PAUSE (for as long as Pause is
engaged), and ITR *:** (5 sec.).
Tape speed indication
"Cassette Loaded" mark
When a cassette is loaded, the mark is
displayed for 5 seconds. It blinks when the
VCR's EJECT button is pushed.
INDEX indication
ON
AUTO
OFF
ON
OFF
ON