Maintenance; Technical Data; Environmental Regulations - BORETTI BARISTA Operating Instructions Manual

Maintenance

Manufacturer-recommended cleaning procedu-
res to be performed at the end of each workday:
1. Clean the seal of the coffee delivery group
with a soft brush.
2. Rinse the filter basket and filter holder
with warm water and add a special clea-
ning product that is suitable for daily clea-
ning of coffee machines.
3. Place the filter holder complete with the
closed filter onto the coffee delivery group.
4. Press the "star" key for coffee delivery.
Unscrew the filter holder slightly until wa-
ter flows along the edges. Push the "star"
key again after 15 seconds. Remove the
filter holder and take out the closed filter.
5. Clean the drip-tray regularly and empty
the catch basin so that the catch basin
does not overflow.
6. Clean the cup-tray with a soft cloth.
7. Clean the steam wand and spout thorou-
ghly with a non-abrasive, damp cloth im-
mediately after each use to prevent clog-
ging of the steam holes and to keep the
taste of previously steamed drinks from
lingering. Do it without touching the wand
directly. WARNING: The surface is hot.
Manufacturer-recommended weekly cleaning
procedures:
1. The delivery group and the spray plates
must be cleaned with a cleaning product
that is specially formulated for espresso
machines and that is suitable for periodic
cleaning. Place one teaspoon of the clea-
ning product into the closed filter and then
into the delivery group.
2. Push the "star" key and wait about 30
seconds. Press the "star" key once more
to stop and allow the cleaning product to
work.
3. After the product has been left for 30 se-
conds press the "star" key again. Unscrew
the filter holder slightly until water flows
along the edges. Push the "star" key again
after 30 seconds.
4. Remove the filter holder and continue
cleaning. Finally, brew one cup of coffee to
remove any residual detergent taste.

Technical Data

Dimensions: 320(W) x 450(D) x 430(H) mm
Net weight: 35 kg
Power supply voltage: 230V 1-phase – 50 Hz
Environmental
Regulations
Should you wish to discard the machine for any
reason, please comply with the following:
Take the machine to the local authorized com-
pany that collects discarded household appli-
ances. Correct processing enable valuable ma-
terials to be recycled in an intelligent manner.
Before discarding your machine it is important
that you cut off the power supply cord and re-
move it together with the plug. This machine
has been accorded the appropriate mark in ac-
cordance with European Directive 2002/96EG
regarding discarded electric and electronic
equipment. This directive determines the
standards for the collection and recycling of
discarded equipment that apply to the entire
territory of the European Union.
NL
FR
EN
41