Brewing (Espresso) Coffee - BORETTI BARISTA Operating Instructions Manual

Brewing (Espresso)
Coffee
Brewing a Single Espresso Cup:
1. Fill the filter holder with one spout with ap-
proximately 6-8 grams of ground coffee.
2. Press the coffee down.
3. Remove any ground-coffee overflows from
the filter holder surface.
4. Insert the filter holder into the delivery
group; turn the handle towards the left
to enable insertion, then turn the holder
handle towards the right until it locks into
place. Make sure that you turn the holder
firmly and that the holder is solidly in place.
5. Place an empty cup underneath the filter
holder spout.
6a. For automatic dosing press touch-key 1 or
3 on the touch-pad (fig. 2). The coffee will
come out of the spout and stop automati-
cally.
6b. For manual dosing press the "star" key on
the right side of the touch-pad and wait
until the coffee comes out of the spout.
Once you have attained the desired quan-
tity press the "star" key once more.
7. When the coffee brewing procedure is
completed, remove the filter holder and
throw away the coffee dregs.
Brewing 2 Cups:
1. Fill the filter holder with two spouts with
approximately 12-16 grams of ground cof-
fee. 2. Press the coffee down by using the
press available in the dosing grinder.
3. Remove any ground-coffee overflows from
the filter holder surface.
4. Insert the filter holder into the delivery
group; turn the handle towards the left
to enable insertion, then turn the holder
handle towards the right until it locks into
place. Make sure that you turn the holder
firmly and that the holder is solidly in place.
5. Place two empty cups underneath the fil-
ter holder spouts.
6a. For automatic dosing press touch-key 2 or
4 on the touch-pad (fig. 2). The coffee will
come out of the spout and stop automati-
cally.
6b. For manual dosing press the "star" key on
the right side of the touch-pad and wait
until the coffee comes out of the spouts.
Once you have attained the desired quan-
tity press the "star" key once more.
7. When the coffee brewing procedure is
completed, remove the filter holder and
throw away the coffee dregs.
Using Coffee Pads:
The Barista can also be used with coffee pads.
If you use coffee pads, replace the filters in the
filter holders with the included coffee pad fil-
ters. Proceed as follows to replace the filter:
1. Place a small flat screwdriver between the
filter and the filter holder and raise the fil-
ter.
2. Remove the filter from the filter holder.
3. Place the desired filter into the filter hol-
der and click it firmly into place.
NL
FR
EN
39