Mac Filtering - AirTies Air 4420 User Manual

3.
4.
letters and digits) in the Passphrase
that is not easy to guess. Click Save.
5.
WEP Security WEP is less secure then WPA and should only be used if your PC's wireless card
does not support WPA. To configure WEP secutiry
Settings
1. Go to Wireless Security Settings under the WIRELESS
interface of your device.
2.
3. Select Open for Authentication Mode.
4. For WEP Security Type
a.
b.
c.
d.
5. You can enter up to 4 network keys and choose the one you want to use.
Click Save.
6.
Security Type.
SSID select WEP.
1. Click on
3.2.4

MAC Filtering

of your device.
2. Select the
3. Check the
4.
Select Just Allow MAC Addresses in MAC List.
Address
5.
Select Just Deny MAC Addresses in MAC List.
the device in the New MAC Address
button.
6. Click Save.
Your AirTies device supports 802.1x Authentication protocol as well. For
AirTies Website at www.airties.co
MAC Filtering under the WIRELESS
SSID
Enable MAC Filtering box.
ADD button.
.
New MAC
ADD
20