Wireless Security Settings - AirTies Air 4420 User Manual

In the Channel
Power
Bandwidth
wireless data rates
the Primary SSID
Rate shows the highest wireless data transfer rate supported by your
device. It is set to Auto
Up to four separate SSIDs can be configured. By default one is configured. To add
additional SSIDs you need to check the Enabled check box.
device to connect to.
Checking the Hidden SSID box will hide your SSID during broadcast.
seeing your network within their range.
Checking User Isolation will prevent clients connecting to your network
The security level can be set in the Security drop down box. This should
be set to the highest security level WPA/WPA2.
section. This should contain at least 8 characters.
Save
3.2.3 Wireless
Security Settings
which is WPA2.
MAC Address Filtering allows you to control which network cards can connect
to the AirTies device and share your Internet access. For your wireless network
encryption protocols be activated.
WPA2 Security
Settings
all the wireless adapters in your network should support WPA2. For Centrino
1. Go to Wireless Security Settings under the WIRELESS
interface of your device.
2. SSID select WPA2.
19